Ummm, I just bought a Reflex Nomad (Hoyt Dorado) riser with the intention of using the Black Max ILF limbs from my Morrison.
After doing a little research online, it appears that I may have to modify the limbs (?)
Can anyone clarify this for me, for definite?
If I do need to modify the limbs, can anyone tell me exactly what I need to do?
you have to press the ilf fitting out,and replace it with the hoyt fitting...i had someone do mine i was scared
Where can I get the Hoyt fittings?
lancaster sells them.you can call and a tech will walk you through the whole ordeal
Thanks Steve.
Have a biscuit.
:goldtooth:
Great info. I was confused if the mod was to the limbs or the riser. Thanks.
Do the Trad Tech limbs shoot better than the original hoyt limbs?
I have no idea, I just bought a bare riser.
The trad Tech Black Maxes are fantastic on my Morrison though. Haven't got a bad word to say about 'em.
No mods to the riser. You may have to sand a little off the length of the limb butts as well as changing to the Hoyt hardware. I looked for a good used Dorado for what seemed like forever, so I just bought a 21 inch Hoyt Excel ILF in the blackout color instead. I have two sets of TT limbs, nothing bad to say about them either.
Hey Rob, Sam Koger here. I have a set of the Hoyt fittings, not using them, will be glad to give them to you, they came on a set of ILF I switched over. Pm me your addy and will get them on the way buddy!