Trad Gang

Main Boards => PowWow => Topic started by: Woodswalker2 on July 02, 2011, 11:21:00 PM

Title: Enough for buffalo????
Post by: Woodswalker2 on July 02, 2011, 11:21:00 PM
I shoot a tomahawk diamond ss longbow 60#@28.  Pushing 615gr Easton traditional only arrow with a zwickey no mercy head.  Can I get enough penetration to efficiently take a buffalo.  Thoughts and comments appreciated. Thanks
Title: Re: Enough for buffalo????
Post by: GRINCH on July 02, 2011, 11:24:00 PM
with proper shot placement you should be good.
Title: Re: Enough for buffalo????
Post by: Shawn Leonard on July 02, 2011, 11:29:00 PM
Super sharp head is a must and keep the shots close. Never shot one or hunted them but have read a lot! Shawn
Title: Re: Enough for buffalo????
Post by: sputterman on July 02, 2011, 11:33:00 PM
I think you could hunt engine blocks with that setup. Happy hunting
Title: Re: Enough for buffalo????
Post by: Woodswalker2 on July 02, 2011, 11:39:00 PM
By buffalo I mean bison and the 165gr zwickeys will shave you
Title: Re: Enough for buffalo????
Post by: Joseph on July 03, 2011, 12:01:00 AM
More than enough.  Joseph
Title: Re: Enough for buffalo????
Post by: Shinken on July 03, 2011, 12:05:00 AM
Did I hear TATONKA BBQ?

Get 'r done!

Shoot straight, Shinken

  :archer2:
Title: Re: Enough for buffalo????
Post by: pdk25 on July 03, 2011, 12:15:00 AM
Glad that you meant bison. Refer to the test shots on a buff that amar911 recently posted with a bow that was 68# @ 29.5".


http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=105061;p=10
Title: Re: Enough for buffalo????
Post by: ozy clint on July 03, 2011, 03:30:00 AM
was about to say don't do it till i found out that you were talking about bison. good luck
Title: Re: Enough for buffalo????
Post by: Smallwood on July 03, 2011, 06:20:00 AM
more than enough with proper shot placement. Remember...keep your shots low!
 (http://i124.photobucket.com/albums/p31/smallwood1972/Animal%20Vital%20Areas/northamericanbisonvitals0jd-1.jpg)
Title: Re: Enough for buffalo????
Post by: Kentucky Jeff on July 03, 2011, 08:51:00 AM
Wow!  I'm guessing the lungs are the money shot on that bad boy!
Title: Re: Enough for buffalo????
Post by: Rob DiStefano on July 03, 2011, 05:48:00 PM
man, that tatonka is one huge 1 ton target with a big lung bull's eye.  cool!
Title: Re: Enough for buffalo????
Post by: Ron LaClair on July 03, 2011, 06:26:00 PM
Notice how high the shoulder (scapula) is. The hump tends to cause some to shoot high so be sure and keep your shot low enough.

Some years ago I watched Jim Stepp maker of the "Step Ladder" climbing system when he shot a bison with one of my Shrew longbows. The bow weight was 57# and he shot completely through the animal with the arrow landing on the ground on the other side. The arrow he used was a 400gr Gold Tip tipped with a 125gr 4 bld Steel Force broadhead. He cut ribs on both sides, I wouldn't have believed it if I hadn't seen it myself...   :eek:
Title: Re: Enough for buffalo????
Post by: Jake Fr on July 03, 2011, 08:18:00 PM
i guess if all ellse fails you could call robtatto and use his squrill bow he was talking bout on here a while back. but i think you have enuff to do the deed good luck and take lots of pics and if ya need to my freezer is almost empty if ya need the storage
Title: Re: Enough for buffalo????
Post by: Ron LaClair on July 03, 2011, 09:43:00 PM
You'll need a good size freezer for sure. This one is a cow, bulls are even bigger

  (http://www.shrewbows.com/rons_linkpics/Buff%203.JPG)
Title: Re: Enough for buffalo????
Post by: durp on July 04, 2011, 12:04:00 AM
ya ur good with that set up BUT id use a chain saw for the butchering!!!
Title: Re: Enough for buffalo????
Post by: JamesKerr on July 13, 2011, 11:26:00 PM
I would think so. As I have said before I shoot a 55# Tomahawk with 590 grain arrows that have woodsman elite heads on them. I would shoot with all the confidence in the world at any game animal on any continent. (Except the truly big ones like elephants, and cape buffalo.)