So after going through the easton guide to tuning a recurve (finger release), I realized that my local shop, who caters to mostly compound shooters, had my new bow set up all wrong.
I highly recommend to anyone tuning a new recurve to check the following:
1. Set your nock height approx 1/2 inch above square with your rest height. Most compound guys set it lower than that.
2. Adjust your arrow rest (or build your shelf out) so that when looking square from the back of the bow, your arrow angles slightly to the left. The tip should be about 1/16 inch, or one arrow width, to the left of the string. Mechanical release compound shooters usually line the arrow up dead straight.
There are plenty more ways to une your bow up, but I just wanted to let new shooters like me know that your local shop might not know much about recurves.
Good shootin'!
Very good post. It took me 4 weeks to get these things figured out, via tradgang. A stickied newb thread would probably benefit many. Also adding wool padding and silencers helped me a ton. The knock point is huge though
check the last stickie on the pow wow page......off topic info......AND NEWBIE INFO....click on the "new to trad" link in Robs post
Bow tuning at bowmaker.net and click on bow tuning.............
For the lazy, here are the posts hvyhitter is referring to, all good info:
http://www.tradgang.com/docs/newbies.html
http://bowmaker.net/tuning.htm