I have Silvertip on order, and would like to know if someone can tell me if my widow antler bolts will fit the silvertip?
I ordered the silvertip with brass allen bolts.
Thanks,
Ken
Ken my Silvertips have the stud glued and tapped Into the riser, and the cap just screws on and the threaded bolt does not come out.
Maybe you should call Beth and ask what the threads and thread length are, then compare that info to the BW limb bolts you have. When you find the answer, you can report back here so that we all will know the answer. It would be good to know...
I'm pretty sure you can get it built either way. The one I had built had the inserts in the riser and the standard hex head limb bolts. I did request it that way.
I ordered both of my Tips with the classic allen bolts,that are what i am used to.You can use the standard antlers bolt that most people use,but i don't think you can use a Black Widow bolt because it is designed differently.
My guess would be that brass allen bolts refer to flat head screws with an internal hex for an allen wrench. If this is the case, then as said above, it will have the inserts in the riser.
I won't get the bow until around Christmas, but will find out then.