Can anyone tell me the parameters to use in Stu's Dynamic Spine Calculator for a 56" Shrew Classic Hunter?
Specifically, what is the strike plate position? What should I use for the string material? I know it's a combination of 450+ and B50.
Also, should I use the "Generic Deflex/Reflex Longbow" type?
Thanks,
Gregg cuts the shelves so they are +1/8" from center with the rest material on. I think Gregg will cut the shelf to whatever the customer wants though so if this is a previously owned bow you may want to e-mail Gregg with the serial # so he can tell you for sure...... or you can measure it yourself.
I use the deflex/reflex longbow setting, 1/8"from center, and 8 strand fast flight settings for my 54" Classic Hunter. Stu's calc was spot on for me.
Thanks so much, Chad!
prior to 2011 the shrew bows were cut to -1/8 according to Ron. Who I spoke to yesterday. Currently the bows are cut to center 0. Use the -1/8 plus the thickness of your plate material.
I would count the number of strands in the string and use the actual number.
here is the direct link for the instruction manual for the DSC DSC Instruction Manual (http://www.heilakka.com/stumiller/calculatorinstructions.pdf)
Gene,
Use +1/16" in the calculator.
Gregg
QuoteOriginally posted by Java Man:
Gene,
Use +1/16" in the calculator.
Gregg
Straight from the man himself !
Yep! "Straight from the horse's mouth" (Gregg) and "straight to the horse's other end " (me)! :knothead:
Thanks so much for the info!