A few years ago I bought some AD Trad Lites for my 53lb @28" bow. They never flew right. Nothing I did to them made them work. I heard later there was a quality control issue with a batch or two of them. I have some AD Trads. Can I use them out of bows in the 52-55 lb range?
Also what size wrap do most of you use on AD arrows? I was told 1.25" by one company, but seems like that would have quite a bit of overlap on the wrap. How much overlap is acceptable?
For a 5/16" shaft,1" wrap.I doubt if more overlap would cause a problem.
It is about 15/16" around a 9/32" diameter carbon shaft. Anything less than 1" might be tricky
to wrap.
If you are not set on fancy and printed wraps,
go to a local signshop and ask for some scrap
vinyl. (aka "Signfilm", or sign making vinyl).
It is the same material as the expensive wraps are printed upon. Likely they will give you
some, or for a little money, sell you enough for
dozens of arrows.
Just cut the vinyl to size using straight edge with a sharp utility
knife blade, being careful not to cut thru the
backing on the vinyl.
Good luck!
Onestringer can get you exactly what you need.
http://www.onestringer.com/
Scott and Mindy are great folks to deal with too, and always support our st. Jude Auction generously.
+1 more for Onestringer arrow wraps. I just bought 2 dozen solids for $7 bucks and with shipping added is was still less than $10 bucks. That's dang cheap for 24 arrow wraps and the shipping speed was amazing! I ordered on Saturday, Mindy sent me an email within an hour saying they had shipped and they were here on Monday! WOW........that was fast!
Another vote for onestringer! make sure you get the double dogs also, these protect the wraps from fade and wear! 1" should give you enough for alittle over wrap! I've always put my cock feather over the over lap!
I just finished up doing a dz gold tip trads!
(http://i320.photobucket.com/albums/nn339/JDCOWLES69/arrows52211002.jpg)
+1 more for Onestringer. No worries.
I bought the plain jane white ones at 3 Rivers and they're working great. I cut a quarter inch off of them for my 5575s and have 1/16th overlap.
Uh...
I just went to Onestringer and checked out their prices/selection.
:eek:
Wow. Impressive.
QuoteOriginally posted by PaddyMac:
Uh...
I just went to Onestringer and checked out their prices/selection.
:eek:
Wow. Impressive.
Yeah, 4 dozen solid wraps for $12 bucks.......Can't beat that with a stick!! :knothead: :deadhorse:
http://www.onestringer.com/index.php?page=mods/Products/itemdetail&itemid=103
Yeah. One thing I've learned on Trad Gang REAL fast. When someone says check it out, check it out.
:thumbsup:
Onestringer 8 doz for $18.00 I had them in I think it was 3 days and I live halfway across the country. $2.00 for postage. Can't beat it. He has a chart that will help you with the width or just call him he will tell you what you need. Great customer service.
Semo were able to mix up the solid colors in that 4 doz. or did they have to be the same?
Thanks guy
ckanous, you can mix and match colors all you want.
Scott
Thanks Scott gonna get some ordered this week!
Got the 1.125" wraps from Onestringer. Awesome!