Trad Gang

Main Boards => PowWow => Topic started by: trad_bowhunter1965 on April 25, 2011, 09:29:00 PM

Title: Barge AP Cement
Post by: trad_bowhunter1965 on April 25, 2011, 09:29:00 PM
What is the difference between Barge AP Cement in the Yellow tube and the Blue tube. Can you use the Blue tube for arrow rest? Blake
Title: Re: Barge AP Cement
Post by: JRY309 on April 25, 2011, 11:40:00 PM
The new Barge in the blue tube is Toluene-Free formula,which I guess is more enviroment friendly.But in my experience it is not as good as the old Barge in the yellow tube.To me it has a short shelf life after you first open the tube.I open a new Barge in the blue tube and used some,it did alright.But after about a year in just didn't work as good,it just thickened up to where it didn't flow very well,it was like a blob.The old yellow tube I would use it for a couple of years or more gluing on rests and other leather work.And it was fine and held better in my opinion.I have a blue Barge full tube with just one rest glued and now I threw it in the trash.I think I'm going to get some rubber cement from Tandy the next time I need to do some leather glueing.The old Barge in th yellow tube was all I used for rests/side plates and leather work,I miss it.
Title: Re: Barge AP Cement
Post by: rdoggsilva on April 26, 2011, 01:00:00 AM
I used the Barge in the yellow tube for years on leather work and as stated by JRY309 it had a good shelf life. The blue tube just does not hold like the old Barge, I just don't use it any more. I am now using rubber cement and I really miss the old Barge.
Title: Re: Barge AP Cement
Post by: hvyhitter on April 26, 2011, 03:46:00 AM
For sideplates and rug rests Ive gone to 3M heavy duty outdoor rated double side tape......works great.
Title: Re: Barge AP Cement
Post by: IGetTargetPanic on April 26, 2011, 04:31:00 AM
I use the yellow tube for Everything.. I recently tried the Blue tube and it works just not like the yellow.. The blue doesn't hold as well either..
Title: Re: Barge AP Cement
Post by: Don Baker on April 27, 2011, 11:30:00 PM
Yep, same here, yellow tube is better than the blue.

The glue in the blue tube is a lot runnier and takes longer to set up as well.

Don
Title: Re: Barge AP Cement
Post by: portugeejn on April 27, 2011, 11:38:00 PM
I haven't tried the new stuff yet, but if it is anything like my experience with other new and improved, safer, better for the environment, it is for your own good products, it won't be as good.  I will try it though, but the old Barge's is the best stuff I've ever used bar-none.  

RonP
Title: Re: Barge AP Cement
Post by: Running Buck on April 28, 2011, 01:51:00 PM
The new barge cement comes out like a jelly roll and is tough to work with. I have went back to contact cement in the bottle. 3-M makes it with a small brush attached to the cap, when you get done screw the cap on tight and store it upside down so no air gets in the bottle. I think the one I have is going on 4 years old and still works fine.
Title: Re: Barge AP Cement
Post by: YORNOC on April 28, 2011, 04:55:00 PM
They are not supposed to sell the yellow Barge to anyone other than a registered business due to the Toluene.  You guys are right on, yellow is a totally different product. Easier to use, stronger, lasts longer.  If doing leatherwork, the yellow is far superior.(as well as everything else too)