Print Page - Gold Tip Weights

Title: Gold Tip Weights
Post by: FrankM on April 18, 2011, 10:49:00 PM

Where do you guys buy yours? I need to add about 20 grains up front.

Title: Re: Gold Tip Weights
Post by: Javi on April 18, 2011, 10:55:00 PM

Lancasters

Title: Re: Gold Tip Weights
Post by: BWD on April 18, 2011, 11:02:00 PM

Black Widow. Buy the combo pack and you are set for a while.

Title: Re: Gold Tip Weights
Post by: BigJim on April 19, 2011, 07:17:00 AM

We also sell them along with the wrench.

bigjim

Title: Re: Gold Tip Weights
Post by: mmisciag on April 19, 2011, 08:44:00 AM

The wrench is key!!!!

Martin

Title: Re: Gold Tip Weights
Post by: Shawn Leonard on April 19, 2011, 09:49:00 AM

Mine, do not fit the inserts. I have a dozen 30 grainers and they will not screw into the back of the 600 inserts. Shawn

Title: Re: Gold Tip Weights
Post by: BigJim on April 19, 2011, 09:51:00 PM

Shawn- Is it possible that there is glue in the end of the inserts? All the inserts are made the same and should accept the weights.

bigjim

Title: Re: Gold Tip Weights
Post by: SMA on April 20, 2011, 11:49:00 AM

Brass or steel inserts are easier.

Title: Re: Gold Tip Weights
Post by: LostNation_Larry on April 20, 2011, 01:09:00 PM

Lost Nation Archery.

Jim is right about the glue. Get a little behind the inserts when installing and it is tough to get the weights installed.

Title: Re: Gold Tip Weights
Post by: BWD on April 20, 2011, 02:09:00 PM

QuoteOriginally posted by SMA:
Brass or steel inserts are easier.

Yep it's easier, but screw in weights do allow one to add or remove weight to accommodate using different broadhead weights on the same arrow.

Trad Gang