Trad Gang

Main Boards => PowWow => Topic started by: BigJim on April 14, 2011, 06:53:00 AM

Title: VPA Terminator 1 1/4" broadheads
Post by: BigJim on April 14, 2011, 06:53:00 AM
Ok guys, If there is anybody interested in the  1- 1/4" heads, I have nearly half of my special order left. I have sent messages to everyone who ordered, but aparently several guys have changed there mind.
Check out the Sponsor classified for the details on these heads.
thanks, bigjim
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Ben Maher on April 14, 2011, 08:52:00 AM
Jim,
i'll try and ring through tomorrow from over here .

put me down for a pack...
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Boomerang on April 14, 2011, 12:26:00 PM
TTT for BJ
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Ken Taylor on April 14, 2011, 01:44:00 PM
Just ordered 2 packs of 3 from Jim himself!

200 grain glue on.

The big black bear I'm going to shoot with one of those must be just stirring in his den at this time.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: wapiti792 on April 14, 2011, 03:20:00 PM
I got 2 packs myself and will get more once I run them through a few ctitters  :)
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: L. E. Carroll on April 15, 2011, 02:48:00 PM
Jim

It really disheartens me to read that some of the guys who placed PM's and "Verbal Commitments" to make that "Special Run of Big VPA's" a reality, did not follow through with their commitment....      :(    

I know you invested a lot of $$ to make this happen for all of us...      :readit:          :coffee:
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: kawika b on April 15, 2011, 03:12:00 PM
I didn't order any but things can happen, and most times not good, in a persons life.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: BigJim on April 15, 2011, 10:36:00 PM
I'm not chastizing anyone for not following through. I just need to sell them. If I still  have some left, they can purchase them at a later date if they choose.
thanks, bigjim
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: John Dill on April 15, 2011, 11:42:00 PM
Sent you a PM Little Jim  :D
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Kevin Dill on April 16, 2011, 09:19:00 AM
I too noticed this. I ordered 2 packs and paid for them. I thank Jim for being a man of his word and getting this done.

On the flip side, I recall a lot of interest when these broadheads were only a "maybe". Lots of cheerleading and "Sure, I'm in" stuff. If you ordered them, you should accept them...or contact Jim and explain.

Integrity. Where is it?
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Tree Rat on April 16, 2011, 09:28:00 AM
Sad to say, but this is normal when someone steps to order for a group. Be it T-shirts, hats, broadheads, or most anything else.

Most people that undertake something like this know you will realize about 50% honest take rate from the pre-orders unless you require prepayment.

Nature of the beast....
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Charlie Lamb on April 16, 2011, 09:50:00 AM
While I didn't say I'd take some in the initial discussion, I will take a pack of the 200 gr. glue on's when the first of May comes around.

Thanks for being who you are Jim.
  :thumbsup:    :clapper:
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Steve Clandinin on April 16, 2011, 10:41:00 AM
Jim,I'm the same as Charlie I didn't obligate But on the 1st of May I'll take 2-3paks of 200 gr. glue ons,you have my adress just send them and bill me .Thanks steve.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Mike Gerardi on April 16, 2011, 10:46:00 AM
You won't be disappointed with these heads. Recieved mine some time ago and they are fantastic. Great all around head and real easy to sharpen..
That was only for the guys who  might be on the fence about getting some.  :)
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: StanM on April 16, 2011, 12:20:00 PM
Hey Jim, we ocassionally get a customer wanting a bigger and/or heavier head.  I'll go through some old e-mails and see if I can't have some of them get in touch with you to take up some of the surplus.

Fellas, believe me you won't be getting a better made broadhead than what Big Jim's got.  Jeff does an incredible job machining these.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Dirtybird on April 16, 2011, 02:06:00 PM
Just ordered some glue on heads.  Can't wait to try them out.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Steve Clandinin on April 16, 2011, 02:23:00 PM
Same as dirtyBird.Can't wait.
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Guru on April 16, 2011, 03:16:00 PM
:clapper:
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Skipmaster1 on April 16, 2011, 03:38:00 PM
Already got mine, but am gonna order some more on monday. Come on guys, these are GREAT heads and he stuck his neck out getting these for us
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Ken Taylor on April 16, 2011, 04:01:00 PM
Hmmmm... darn... by the sound of things, I think I should have ordered 3-4 packs instead of two!
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: Steve Clandinin on April 17, 2011, 09:31:00 AM
TTT for the little Fella to move some stock !
Title: Re: VPA Terminator 1 1/4" broadheads
Post by: BWD on April 18, 2011, 11:46:00 AM
bump for large james