Trad Gang

Main Boards => PowWow => Topic started by: bsoper on April 07, 2011, 12:14:00 PM

Title: Wood arrow spine question
Post by: bsoper on April 07, 2011, 12:14:00 PM
I think I know what the answer will be, but I want to ask anyway.

My recurve is 50#, and I have 60-65 spined arrows cut to 30" with 125g tips. These arrows were shooting nicely with this bow.

If I get a bow that is 40-45#, do you think these arrows will still work, or will I need lighter arrows?

I ask because I want to know if I should sell the arrows with the bow, or keep them to use still.

I think the answer will be, you will just have to wait and shoot them to see, but anyway...Thanks for the help.
Title: Re: Wood arrow spine question
Post by: smilinicon on April 07, 2011, 12:18:00 PM
You just never know with wood shafts, but I would say they will be too stiff. It depends on how much the new bow is center-cut.
Title: Re: Wood arrow spine question
Post by: Don Stokes on April 07, 2011, 12:24:00 PM
I would think you are underspined for a 50# recurve with arrows that length. Did you shoot them with broadheads? The arrows may well work with the lighter bow if it's also a recurve, especially if it has a skinny low-stretch string, and you can always add point weight to compensate if needed.

My 40# Archery Traditions Patriot TD recurve shoots 60-65# shafts cut to 28 1/2" just fine, with 160 g. broadheads.
Title: Re: Wood arrow spine question
Post by: lpcjon2 on April 07, 2011, 12:26:00 PM
keep them, you can add more head weight to compensate or build the side plate in or out on the new bow.
Title: Re: Wood arrow spine question
Post by: bsoper on April 07, 2011, 12:32:00 PM
I have only shot field points on them. The new bow will probably be a white wolf custom longbow, which are cut past center. I was thinking if I put a heavier tip on them, I should be fine, since I will want the heavier overall weight for deer this fall.
Title: Re: Wood arrow spine question
Post by: BRITTMAN on April 07, 2011, 03:24:00 PM
If you go with a 45 lb bow im betting they will be fine at that length . If not all you have to do is go up a little on point weight which would be alot less than buying new arrows .
Title: Re: Wood arrow spine question
Post by: Bjorn on April 07, 2011, 03:34:00 PM
I think Don Stokes is right on the money.
Title: Re: Wood arrow spine question
Post by: McDave on April 07, 2011, 03:41:00 PM
Sometimes I've sent along a few arrows that I thought worked particularly well with a bow I've sold, but who knows if they'll work that well for the next guy?  Arrows are a very personal thing.  If they don't work well with your new bow, they'll probably work fine for some other bow you'll get on down the line, or some friend's bow.
Title: Re: Wood arrow spine question
Post by: Herder on April 07, 2011, 04:56:00 PM
Here is a spine-calculator for wooden arrows
(for carbon arrows too)


http://www.bogenblog.de/index.php?/pages/spine-rechner.html
Title: Re: Wood arrow spine question
Post by: Bowmania on April 07, 2011, 05:21:00 PM
I think the odds are that the arrows would work better for your new bow, than thinking that they'd work for the guy that buys you current bow.

Bowmania