Print Page - Dale Dye Riser Limb Attach ?

Title: Dale Dye Riser Limb Attach ?
Post by: MJB on February 28, 2011, 04:21:00 PM

I didn't want to hijack the other post. All of the takedowns I seen have the bezel/allen bolt for limb attachment. Does he offer the bolts in the riser. Where you would use the nob like a Silvertip.
Thanks
Mike

Title: Re: Dale Dye Riser Limb Attach ?
Post by: cacciatore on February 28, 2011, 04:45:00 PM

Never seen one that way Mark,but I don't think it is difficult to have them made so.When Dave was going to finish my 2 risers I asked for the Allen bolts,that I prefere,but he had already prepared the riser with the bedded bolts,when I asked him if it were possible to change it he asnswered that it was not a problem,so I immagine everybody can do that.

Title: Re: Dale Dye Riser Limb Attach ?
Post by: MJB on February 28, 2011, 04:49:00 PM

Thanks Felix

Title: Re: Dale Dye Riser Limb Attach ?
Post by: cacciatore on February 28, 2011, 04:51:00 PM

You Welcome Mark.

Title: Re: Dale Dye Riser Limb Attach ?
Post by: Sixby on February 28, 2011, 06:18:00 PM

It would be a small thing to just screw in a headless allthread. You could superglue it if you wanted it to be permanent. Or JB weld it.

Trad Gang

Main Boards => PowWow => Topic started by: MJB on February 28, 2011, 04:21:00 PM