Just picked up a 60 46/28 TT any recommendations on BH and NH and carbon arrow recommendations would be appreciated.
Thanks
Mine likes 7 1/2". Try CX150's if you are shooting a 29" arrow with 125 up front.
7 1/2 BH
5/8 above for the nock
400s should work out of that TT
Nice pick up...
TTT
The bowyer's recommendation will be great advice.
7 1/2 is were mine shoots the best.
Chad
On that bow I had it at 7.5 and a hair above 1/2 inch on the nock.So Steve is dead on with his advice.I did play around with many adjustments on it as I would typically do for any bow when farting around with it and thats where it ended up for me.
I shot CX 250s cut to 31 with 200 grains up front.
I draw 30 inches.That bow was probably around 52#s at my draw.It doesnt stack at 30".
If you draw 28 inches a CX Hertage 150 cut to 29 would be a good arrow to start with.Play with point weight.It helps to have many points from 100 to 250 grains to play around with when testing carbons in my experience and its a good idea to invest a little $ in different sizes.
If you want a heavy arrow the 250s with more point weight and cut to 31 inches would be worth a look.I would try anything from 200 to 300 grains up front on those.
You can adjust spine with carbons by lengthing and shorting ofcourse.
250s longer and 150s shorter would be appropriate.
Whats your draw length?
7 1/2 for me too,but I had to order a special bowstring for it because the standard one was way too short!
I started out shooting my Tall Tines at 8" because that is the lowest I could go with the suppled string. I ordered a new (longer) bowstring and shot it at 7.5" last night. It shoots much better at 7.5 than when braced at 8".
How do you know if he got a longbow or a recurve?
7.5 for me too