Where I hunt elk and mule deer, a trail motorcycle is a good idea and this winter I traded some work for a nice older trail bike. (I don't want a mtn. bike. I already hike many miles each day hunting and don't need to add riding a b-cycle 10 miles up hill at about 7000 ft).
I am not interested in riding into the back country off road with the motorcycle- thats what legs are for. But it will be great to use to hunt different areas that I would previously have had to drive over to in my 3/4 ton Dodge diesel (read ball buster). These are dirt roads or unmaintained dirt, or jeep trails. Very rough & slow going in a big truck.
Anyway, I am looking for suggestions regarding how I will carry my longbow. Its a one piece with a quiver. Now I know about the broad heads and keeping them secure is one issue and thats pretty simple to solve. But how should I carry the bow? Strung, unstrung, in a scabbard? Simple is what I want.
I have seen another archer carry his strung over his shoulder. Thats a great way to carry it- until you wipe out.
Thanks in advance and any other suggestions are welcome.
Joshua
You could make a bow tube out of some PVC and PVC caps and mount it to the frame with zip ties. Un-strung so the tube can be smaller diameter but large enough to accomodate the bow in a protective sleeve. Say 2-1/2"
You may want to check out the regs before you get to planning too hard..I think in colorado you have to have it in a case (closable) or unstrung...I carry mine in a case for a strung bow mounted to the side of the bike with an assortment of bracketry, still not real good if you wipe out but it works just gotta take it easy
This is actually a dog leash attached to my bow quiver. The bow is strung but it could be unstrung.
(http://www.shrewbows.com/rons_linkpics/Shrew%20Sling.jpg)
Ron, that looks like a great idea! Unstrung, but on my back. If I wipe out its probably no worse than getting a pvc tube across the ribs. I may put the bh's in their own little tube attached to the seat rack.
Joshua
The ride is not the problem, but the crash could be as you mentioned.Remember, you are likely up the mtn. and back down the mtn. in the dark. Snag that bow on a tree at any real speed and your bow will be the least of your concerns. A strung bow string over the shoulder is a potential cheesecutter on your throat in a crash. Get another longbow in a 2 piece takedown. I know its not what you want to hear, but is much safer. Same for horses and mountain bikes.I put my 2 piece LB and quiver in or outside whatever size pack I'm using that given day.I used to use a three piece take-down but prefer the two piece because I can assemble it so fast w/o tools or parts to lose. Another excuse to get a new bow is a good thing in my mind.LOL. I've ridden and crashed my share of horses and bikes to know @#$% happens fast,so take a few safety precautions and hunt another day.
You folks have been reading my mail. I have a mtn bike, motorcycle, & horse. Use the mtn bike a lot carrying the 70" LB strung & standing straight up in my panniers & tied to the seatpost w/my BQ in between as a cushion. This works well. Nothing yet suits me for the motorcycle or horse. I'm thinking pvc tube capped on each end w/arrows inside.
I tow a deer cart with my bike. Pulling out a deer on flat ground with a bike is easier than pulling it on foot. I have a dirt access road. It is easier with a shrew than a 70 inch longbow. However, if you tow your cart you can put your bow in the tube on the cart, or you can just get a shorter bow.
I took a motorcycle hunting when I was a kid a lot. I had it in a tube so it stuck straight back.
This was from some years ago on a hunt in Colorado. I had two osage bows and they road in a rifle scabbard.
(http://www.shrewbows.com/rons_linkpics/osage_on_a_horse.jpg)
This is the Shrew back quiver which had a pocket on the back to hold an unstrung bow, a very handy rig but I stopped making them. I've had some inquiries as of late so I might bring it back.
(http://www.shrewbows.com/rons_linkpics/Shrew_back_quiver.JPG)
It's hard to see but this is a back quiver that I had made for a two piece take down bow. It had two "pockets" on the back that I could slide each half of the bow into. The main body of the quiver was large enough to hold a loaded bow quiver. It was a very safe and handy way to transport the bow and arrows from horseback of bike.
(http://www.shrewbows.com/rons_linkpics/Ron_in_the_Hi_lonesome.jpg)
Joshua,
I've used a Rokon in the Colorado Mountains since 2004. Until last year I shot a wheel bow and used a scabbard mounted to plywood and attached to the side of my bike. Last year I hunted with a long bow and used a length of PVC tube, painted black and capped. I don't think zip ties will hold up, use large hose clamps instead. I had a bunch of mounting hardware break on my compound scabbard just because of the rougher-than-a-cob roads.
I have pics someplace but no time to search for them at the moment. I padded the inside ends of the PVC tube and then had my LB in a sleeve case. Worked great.
I was gonna say, check with Ron Laclair he's the guru on this. But... I see he's already been here! :thumbsup: Jason
(http://i548.photobucket.com/albums/ii322/Blackstick-photos/TheBowhunter.jpg)
Haven't seen you post in awhile Ron. If anyone, I knew you'd have a good answer straight from experience. Hope all is well w/you & family. Thanks. Great pic Blackstick.
Have any of you seen the "piggyback" bike that you hook up to your bike for a kid to ride? It is just like a small bike, except no front end or wheel. Instead it hooks to the seat post, right under your seat. It follows right behind ya and would be simple to hook up whatever size bow. I see 'em on Craigslist alot. Check 'em out.
Oops, after seein' that pic of Ron on his bike I forgot this was about motorcycles.. :knothead: ...Don't think they'd work for a mototrcycle, but would work well for a bike.
Some good thoughts so far. Keep em coming.
I'm pretty psyched about the dirt bike. Now I can really be more flexible in where I hunt. I don't have to break down camp, crawl my way to a new area 10 or 20 miles away.
Many a day I chose not to explore another place simply because taking the truck would take too much time, or too much thrashing around.
Using the motorcycle to "commute" sounds pretty appealing as I sit here dreaming of next elk season.
Joshua
Get a 4 cycle, they're quieter that a 2cy, ying-a-ding-ding.
I got a Honda Ruckus scooter, only 49cc's but I was surprised how easily it hauls my heavy carcass, even on moderate hills. It gets me and my gear to my hunting area. It's really quiet, purrs like a kitten an gets about 100MPG. Since I had both knees replaced I can't travel by foot-mobile like I once could... so you do what ya gotta do.
Here is a link to another tread in the matter.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=088135
BTW, what do you guys use to prevent thefts? Thats one of my main concerns- leaving a bike for 12 hrs that two guys could lift into the bed of a truck.
Ron, that back quiver is super sweet. I use a cheap bike in WY to get me through the service roads from camp. That quiver would be the cat's meow... :bigsmyl:
Cable through the wheel and around a tree or through the frame.And maybe a camo net or build a blind to hide it in.
I have a Yamaha XT225 that I use for hunting on logging roads. I carry my bow in some forks that I attached to the handle bars, or break it down into a case and attach it to the rack I put on it. A hard case would be nice in a spill but this is what I have now. I have not yet come up with something better for my bow; it is a recurve so PVC pipe won't work for me.
I did want to post another idea for you.
Something I have found real handy is a hauling rack over the rear wheel that is attached to the frame.
The rack I have is made by ProMotoBillet, they make them for a lot of bikes. You can google them if interested. I sometimes attach a plastic milk crate to the rack (with cable ties), which is handy for hauling things without having to tie everything down, like a day pack. I sometimes hook a bungie across the top of the crate but for short trips on better roads I don't bother. The crate keeps straps on the pack from dropping down into the wheel or spokes.
You can also put a lot of boned meat in game bags a milk crate and it is pretty secure, and then wear your pack on the way out.
I have a trail bike that I putter around the logging roads. The bow is strung and the string goes over the two mirrors on each side of handle bars. The bow rests on plastic cowling over head light. works as long as Im going slow. arrows are in my side quiver strapped to rack on rear
If you really wanted to tote your bow in style you could go all out with buckskins on a Harley and a Bear head helmet... :biglaugh:
(http://www.shrewbows.com/rons_linkpics/BuckskinBiker.jpg)
Great looking bike & leathers Ron!
QuoteOriginally posted by Blackstick:
(http://i548.photobucket.com/albums/ii322/Blackstick-photos/TheBowhunter.jpg)
i like so much this pic !
somebody know who is this guy ?
Sorry, I can't help on that. I found that picture somewhere on the Internet and copied it. It is my favorite old time picture, as I like both bowhunting and motorcycles.