I want to start cutting my own arrows. I have a 12" chop saw, will that work with the right kind of blade? what kind of blade do I need? I am off to harbor freight today to look at the little cutoff saw everybody talks about. what blade do I need for that little saw. I am cutting carbon by the way.
I shoot a Bear Grizzly from the early 70's. Everytime I take the string off the next time i string it up the brace height is 1/8 to 1/4 more than when I took it off. so I have been leaving it strung so my brace height is the same everytime i shoot. I have well over 1000 shots on that string. Should I be unstrining my bow? is the increase in brace height the string (B50) or the bow? thanks for the help.
Tav
As for blade just a metal cut off blade will work best. I am not sure I would go with the chop saw. I use just a small dremel tool and a metal cut off blade. The harbor frieght saw does work well though.
You should have not trouble leaving your bow strung buddy.
Thanks man. I am laughing....I was trying to give you a break from all my questions and you are the first to jump in. you're a good guy. thanks.
QuoteOriginally posted by Tav:
Thanks man. I am laughing....I was trying to give you a break from all my questions and you are the first to jump in. you're a good guy. thanks.
Now that is going to Randy's head....J/K
What Randy said is good info..