Trad Gang

Main Boards => PowWow => Topic started by: BigJim on January 24, 2011, 10:27:00 AM

Title: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 24, 2011, 10:27:00 AM
Ok, a lot of people have posted there intent on purchasing some 1 1/4" terminator broadheads. It will take a commitment of at least 18 dz heads before I will order. I have spoke With Bob Morrison and he has decided not to purchase so I will be the only one buying at this time. If you truly want these, PM me with your information and how many heads you will committ too.

They will cost $49.99 for 3 heads. There will be no discount for 1 dz or 10 dz. These are being sold under the normal markup at this price and can only be done with the initial order.
They will be 250 g screw in. heads and available in about 3 weeks after I place the order.

thanks, bigjim
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Guru on January 24, 2011, 12:05:00 PM
Ok Fellas...there ya have it, Big Jim is coming thru for us      :thumbsup:        :thumbsup:
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Dirtybird on January 24, 2011, 02:58:00 PM
Wish they were glue ons!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Kenneth on January 24, 2011, 03:55:00 PM
Big Jim offers his 1 1/2" broadhead in a 250gr. glue-on.  I'm using them and plan to get some more before next season.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: wapiti792 on January 24, 2011, 03:57:00 PM
ttt
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Guru on January 24, 2011, 07:32:00 PM
Up for the guys to send a pm to Big Jim...    :thumbsup:
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 24, 2011, 08:16:00 PM
I could get some of these heads in a glue on, but Jeff told me that he doesn't believe he could get them lower than 220g. If there are enough that would buy the glue on heads, I will order some of those too. As Kenneth mentioned, I have glue on BigJim Heads which are made exactly the same as the Terminators except with more attitude! and they are 250g.

thanks,bigjim
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Terry Green on January 25, 2011, 07:08:00 AM
TTT
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Guru on January 25, 2011, 03:34:00 PM
:thumbsup:
Title: Re: 1 1/4" VPA terminator Pricing
Post by: katman on January 25, 2011, 07:23:00 PM
PM'd big Jim and got my order in. He said there were many guys who have not replied yet.

You guys/gals sittin' on the fence need to get on with it and order so we do not let this opportunity pass.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Larry Surtees on January 25, 2011, 07:27:00 PM
I'm in for 2 1/2 Doz. = 10 packs of 3 each = 30 total.

Thanks and I'm hoping that enough interest is shown to get this great head.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Guru on January 25, 2011, 07:33:00 PM
Excellent guys    :thumbsup:
Title: Re: 1 1/4" VPA terminator Pricing
Post by: L. E. Carroll on January 25, 2011, 08:38:00 PM
I'm in for a dozen.. 4 packages....let me know when they come in by PM or a post here, and I will call with a card # to bill mine too.

Thanks'
Gene
Title: Re: 1 1/4" VPA terminator Pricing
Post by: DW on January 25, 2011, 09:00:00 PM
Just sent the order to Big Jim for a Dozen Heads.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Bowhunter4life on January 25, 2011, 10:12:00 PM
Got my order in earlier today for a dozen heads myself...

I'm thinking hard about his 300 grain 1 1/2" heads also!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Bob Palmer on January 25, 2011, 10:16:00 PM
Anyone have an extra 1.25 VPA laying around I could take a look at and see how it compares to my Snuffers? I'll pay shipping both ways    :pray:
Title: Re: 1 1/4" VPA terminator Pricing
Post by: benny on January 25, 2011, 10:28:00 PM
Pm sent.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Bob Palmer on January 25, 2011, 10:35:00 PM
Thanks Benny!!!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 25, 2011, 11:02:00 PM
We are at 8 doz heads. Understand, that I'm only counting those who have PM'd me.

Thanks all, Bigjim
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 26, 2011, 01:24:00 AM
TTT

just sent my PM

Come on guys, lots of guys said they wanted some!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Kevin Dill on January 26, 2011, 07:33:00 AM
PM sent!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 26, 2011, 05:55:00 PM
ttt ttt ttt
Title: Re: 1 1/4" VPA terminator Pricing
Post by: zipper bowss on January 26, 2011, 07:06:00 PM
Where did everyone go??Here is your chance to get the broadheads you want.
Big Jim is sticking his neck out for you!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: FerretWYO on January 26, 2011, 07:30:00 PM
You will not find many people to stick there neck out to get you what you want help him make sure it was worth it.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 26, 2011, 08:50:00 PM
TTT
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 26, 2011, 09:54:00 PM
We are now at 12 doz.

Bigjim
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Terry Green on January 27, 2011, 09:49:00 AM
Make it a bakers dozen.....I'm in for 12.

I don't PM...so I hope this is good enough...
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 27, 2011, 12:07:00 PM
TTT come on guys, I know there were more people who spoke up
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Bowhunter4life on January 27, 2011, 06:50:00 PM
Back up to the top... Come on fellas let's get them orders to Jim... Easy as sending him a PM!
Title: Re: 1 1/4" VPA terminator Pricing
Post by: katman on January 28, 2011, 06:28:00 AM
ttt
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 28, 2011, 08:37:00 PM
TTT
Title: Re: 1 1/4" VPA terminator Pricing
Post by: J-dog on January 28, 2011, 08:46:00 PM
sent in a pm for my doz
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 29, 2011, 06:52:00 AM
Ok guys, I have spoke with VPA. Yes they have ordered materials for these heads. We are probably about 3 weeks from some heads. If you have any friends interested in these, let them know there coming and to contact us.

We have not as of yet reached 18 dz. but we are close. 18dz won't pay for the entire shipment, but reduces the investment considerably. We will definately sell these this year at the various shoots, but the sooner they go, the sooner I can put that money back in to other inventory.

We apreciate your help, Big Jim and Family
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 29, 2011, 10:39:00 PM
TTT
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Skipmaster1 on January 30, 2011, 08:20:00 PM
Come on guys! Am I gonna have to buy more than a dozen....LOL
Title: Re: 1 1/4" VPA terminator Pricing
Post by: BigJim on January 30, 2011, 09:14:00 PM
We are hung up on 16 Doz. I haven't heard from anyone in a while.

Anyone else?

thanks, bigJim
Title: Re: 1 1/4" VPA terminator Pricing
Post by: jcprintz on February 01, 2011, 05:03:00 PM
TTT
Come on guys Big Jim should be over the 20 doz. mark  by now.
Title: Re: 1 1/4" VPA terminator Pricing
Post by: Jack Guard on February 02, 2011, 10:55:00 PM
Hey, i will take 2 packs.  Shhhhh, dont tell the wife.