Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: YORNOC on January 22, 2011, 03:32:00 PM

Title: Anybody build antler knobs?
Post by: YORNOC on January 22, 2011, 03:32:00 PM
Does anyone make their own antler knobs for takedowns?  Either looking for someone to show me how, or to buy off someone. I'll take either gladly at this point.
Title: Re: Anybody build antler knobs?
Post by: Shedrock on January 22, 2011, 03:39:00 PM
Sticshooter
Title: Re: Anybody build antler knobs?
Post by: Bud B. on January 22, 2011, 03:39:00 PM
Also 3Rivers, a sponsor. has these:
 http://www.3riversarchery.com/Bow+Accessories+Miscellaneous++Antler+Bur+Limb+Bolts_c46_s55_p0_i3401X_product.html

Not the real deal but they look good.
Title: Re: Anybody build antler knobs?
Post by: Terry Lightle on January 22, 2011, 03:42:00 PM
Tollgate Archery ,also are sponsor here.
Title: Re: Anybody build antler knobs?
Post by: Huntschool on January 22, 2011, 04:42:00 PM
Most of the ones out there are castings of real.  That way the mfg. gets a good fit/grip on the bolt.
Title: Re: Anybody build antler knobs?
Post by: JEFF B on January 22, 2011, 04:46:00 PM
sticshooter makes the Best i have seen.  :thumbsup:
Title: Re: Anybody build antler knobs?
Post by: amar911 on January 22, 2011, 05:13:00 PM
Sticshooter for sure!

Allan
Title: Re: Anybody build antler knobs?
Post by: thump on January 22, 2011, 06:28:00 PM
David  P.M. me your phone # and I'll explain to you the way I've made them. It's not hard
Title: Re: Anybody build antler knobs?
Post by: doubleo on January 22, 2011, 06:46:00 PM
Sticshooter is the man.
Title: Re: Anybody build antler knobs?
Post by: AMB on January 22, 2011, 09:20:00 PM
STICSHOOTER!  :thumbsup:
Title: Re: Anybody build antler knobs?
Post by: The Whittler on January 22, 2011, 09:50:00 PM
One of the back issues of Traditional Bowhunter mag. did a how too. Someone here might remember what issue. It didn't look that hard to me.
Text only | Text with Images