Trad Gang

Main Boards => PowWow => Topic started by: stevewills on January 18, 2011, 12:42:00 AM

Title: need pics of hoyt excel limb bolts
Post by: stevewills on January 18, 2011, 12:42:00 AM

need pics of where the limb bolts are and with the limbs on..i dont think mine are going down as far as they should...got about a quater gap in the limb pocket

Title: Re: need pics of hoyt excel limb bolts
Post by: Claymore on January 18, 2011, 04:51:00 AM

Can't take a pick. Might help if you can take one to show us your question. Do you mean they won't tighten down to the flange on the bolt's. If that is it are you sure you backed out the lock screw enough?

Title: Re: need pics of hoyt excel limb bolts
Post by: Reaper TN on January 18, 2011, 12:04:00 PM

I've got two Excels and what claymore says is right on.  If your locking bolt is backed out enough the only other thing I can think of is maybe you have some boogered up threads in the riser.  By the way, my bolts bottom out against the riser no problem.

Title: Re: need pics of hoyt excel limb bolts
Post by: Reaper TN on January 18, 2011, 04:50:00 PM

I can send you a pic if you want, but I don't do photobucket, it would have to be to your email.

Title: Re: need pics of hoyt excel limb bolts
Post by: ckanous on January 18, 2011, 10:05:00 PM

Here is mine bottomed out:
 (http://i214.photobucket.com/albums/cc244/ckanous/IMAG0064.jpg)

Title: Re: need pics of hoyt excel limb bolts
Post by: ckanous on January 18, 2011, 10:08:00 PM

And here is 4 rounds out:
 (http://i214.photobucket.com/albums/cc244/ckanous/IMAG0061.jpg)