Print Page - Arrow Spine Question

Title: Arrow Spine Question
Post by: 30pointbuck on January 13, 2011, 10:45:00 PM

I just got a Martin Jaguar im just getting started into traditional, the bow is 50#@28"
i want to shoot the Game Getter II XX75 which spine will be the correct spine for this set up.
Thanks for any advice.

Title: Re: Arrow Spine Question
Post by: 30pointbuck on January 14, 2011, 10:49:00 PM

Guess nobody talks to new guy's.

Title: Re: Arrow Spine Question
Post by: **DONOTDELETE** on January 14, 2011, 10:52:00 PM

2016 or 2018 with 125grn point

O-wait Your a newbie...I take that back....J/K

Title: Re: Arrow Spine Question
Post by: Jim Wright on January 14, 2011, 10:53:00 PM

Your question a bit general in nature, what is your draw length? what arrow weight are you looking for?

Title: Re: Arrow Spine Question
Post by: Stumpkiller on January 14, 2011, 10:53:00 PM

I talk, but you're talking tin arrows and I shoot cedar.

:dunno:

Title: Re: Arrow Spine Question
Post by: **DONOTDELETE** on January 14, 2011, 10:56:00 PM

woodies would be 60-65 w/160grn & cut 29"BOP

Title: Re: Arrow Spine Question
Post by: Stumpkiller on January 14, 2011, 11:00:00 PM

Or 55-60# with a 125gr head.

Title: Re: Arrow Spine Question
Post by: **DONOTDELETE** on January 14, 2011, 11:02:00 PM

QuoteOriginally posted by Stumpkiller:
Or 55-60# with a 125gr head.

I was going to post that but knew You wanted to talk to the new guy some more...

Title: Re: Arrow Spine Question
Post by: Okie man on January 15, 2011, 12:01:00 PM

Download Stu's Dynamic Spine Calculator and you can plug all of your info in and tinker with the point weight, shaft length, fletch configuration, etc. It's free download and once you get the hang of using it, it takes alot of the guess work out of tuning the arrow to the bow. Here's the link http://www.heilakka.com/stumiller/

Trad Gang

Main Boards => PowWow => Topic started by: 30pointbuck on January 13, 2011, 10:45:00 PM