Trad Gang

Main Boards => PowWow => Topic started by: Ari on January 06, 2011, 09:52:00 PM

Title: fletching question
Post by: Ari on January 06, 2011, 09:52:00 PM
I've just bought some POC shafts and was unsure as to which way the grain should go? If I was looking down the end of the shaft would the grain run horizontal?
Title: Re: fletching question
Post by: magnus on January 06, 2011, 09:58:00 PM
Yes. You want the grain towards the bow that is usually the stiffest side. Make sure you put these >>>>> pointing up and away from you.

Keeping the Faith!
Magnus
Title: Re: fletching question
Post by: **DONOTDELETE** on January 06, 2011, 09:58:00 PM
YES.. the lines run like this  - so the string will be 90deg's to the lines.
Title: Re: fletching question
Post by: Ari on January 06, 2011, 10:39:00 PM
alright thanks guys.
Title: Re: fletching question
Post by: cyred4d on January 07, 2011, 07:34:00 AM
Good advice there.