hey guys i have as of right now 31 arrows i use for small game 6 have judos and the rest field points. im looking for a very cheap or free head that i can make (has to screw into an arrow) for game from sizes of sparrows to rabbits. any ideas will be appreciated. im curious what you DIYers have come up with
thanks,
steven
This is how I make my glue on heads. I know you asked about screw on heads and I did basically the same thing with a 125 gr target blunt. Slotted it and glued the blade in place. The head can then be screwed on as normal. It shoots very well.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=097069
Screw in point with a washer behind it. Get a washer about the size of a quarter and take the dremel and cut V (3-4) shaped notches out and then bend them forward toward the point.you can even use aluminum washers,make sure the whole is smaller than the back of the field point.
Along with the Judo and Tiger Claw...I also use the Zwickey Scorpio behind a field point. Acts just like a Judo, will slide up on thinner arrow shafts which helps grab the ground and arrows fly great.
(http://i30.photobucket.com/albums/c318/b1r9i6a6n/101_9660.jpg)
ive tried the washer idea and diddnt care for it blunts are cheap and fun for small game and stumpin i also use old broadheads that have out lived their usefulness for big game looks like toomanyhobbies may be on to somthing there
This is what I use . Get a field point a little larger than you shoot cut the tip off to make a blunt then put an adder behind it. Some times I take a drill and put a cup on the end of the blunt.
(http://img.photobucket.com/albums/v683/timkoi/arrow2135-1.jpg)
(http://img.photobucket.com/albums/v683/timkoi/arrow2108-1.jpg)
Best thing I have used .