Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: LV2HUNT on November 16, 2010, 11:40:00 AM

Title: 3 Rivers Grind Woodsman
Post by: LV2HUNT on November 16, 2010, 11:40:00 AM
How much work is required on the 3 River's Woodsman (not elite) to establish the initial bevel?
Title: Re: 3 Rivers Grind Woodsman
Post by: bornagainbowhunter on November 16, 2010, 11:41:00 AM
About 5 minutes on a 12" mill bastard file.

God Bless,
Nathan
Title: Re: 3 Rivers Grind Woodsman
Post by: Pat B on November 16, 2010, 11:50:00 AM
about 2 seconds on a table top belt sander for each of the 3 sides!
Title: Re: 3 Rivers Grind Woodsman
Post by: luv2bowhunt on November 16, 2010, 03:51:00 PM
QuoteOriginally posted by Pat B:
about 2 seconds on a table top belt sander for each of the 3 sides!
Just make sure to wear leather gloves... those puppies will get hot in a hurry  :D
Title: Re: 3 Rivers Grind Woodsman
Post by: Pat B on November 16, 2010, 04:08:00 PM
I don't hold it on the belt that long. Just long enough to change the angle. litterly 2 seconds!
Title: Re: 3 Rivers Grind Woodsman
Post by: Traddict on November 16, 2010, 05:38:00 PM
Doesn't take long at all with a file.
Title: Re: 3 Rivers Grind Woodsman
Post by: Michael Arnette on November 16, 2010, 07:37:00 PM
I have done it with a couple dozen strokes on a good file with the the newer regular heads.
p.s. don't get the older heads, they aren't nearly as nice.
Text only | Text with Images