59 pound mild R/D bow with 30 inch arrow with 175-200 grains up front. Thanks. BILL
The 250 is the shaft you need.
250 for sure.
Ditto
Thanks, that is what I was thinking. How do you guys like them compared to the MFX? BILL
I shoot 55#@32" and use the 350's.....sorry to throw that in there
32" is 32"!
Assuming your bow is built at 59#@28" and your draw length is 28" then the 250's will work fine...but if we don't know this yet, do we?
The Heritage 250's have a deflection of .373=84#
I shoot a 55#@28" cut to center recurve that allows me to tune them to 29.25"bop with 225gr tips.
To really help you further we need to know your draw length and how the shelf on your bow is cut...to center, +1/16", +1/8", etc. :thumbsup:
Snag, 59 is what I am pulling it is cut out from center. It is a Dwyer original. BILL
You can make the 250 work. I bet you will need 225 up front. I imagine you will need 300 up front to shoot the 350. That is what works for me.