Trad Gang

Main Boards => PowWow => Topic started by: mand0ralen on September 06, 2010, 06:00:00 PM

Title: CE heritage 75 Nock question
Post by: mand0ralen on September 06, 2010, 06:00:00 PM
Hello,

it seems that i must shoot CE Heritage 75.

These shaft internal diameter is smaller than 150 250 etc ... so it must use Thunderstorm nock.

The main problem with these it that their colours do not include red or black nocks (my favourite).

Do you know any alternate compagny that provide nock compatible with such shafts ?

best regards, M
Title: Re: CE heritage 75 Nock question
Post by: Killdeer on September 06, 2010, 06:09:00 PM
I wish I could help you, but I have not seen such. I take comfort in that the white nocks are more visible in flight.   :rolleyes:

Gold Tip 1535 should do the trick for you, and they take the same nocks and inserts as the heavier spines. Just a thought.

Killdeer
Title: Re: CE heritage 75 Nock question
Post by: JRY309 on September 06, 2010, 08:33:00 PM
I haven't seen any compatable nocks for the CE 75 or 90,I just use the white nocks in my CE 90's.I wish there were more choices in the color of them.
Title: Re: CE heritage 75 Nock question
Post by: SlowBowinMO on September 06, 2010, 11:00:00 PM
CE also makes a flo yellow for those arrows, but other than white I think it's the only alternative.
Title: Re: CE heritage 75 Nock question
Post by: Celtic Dragon on September 07, 2010, 08:06:00 AM
It might be these you need.

http://www.tradtecharchery.com/Details.aspx?itemNo=2250387

I have a full CX catalogue at home and I'll give that a check tonight.
Title: Re: CE heritage 75 Nock question
Post by: Celtic Dragon on September 07, 2010, 03:10:00 PM
Mand0ralen, I've checked the CX catalogue and white and yellow are your only choices if you want to stick with CX. Thats not to say another manufacturer doesn't produce nocks in the same diameter.

HTH
Simon
Title: Re: CE heritage 75 Nock question
Post by: mand0ralen on September 07, 2010, 04:21:00 PM
hi all,

Killdeer: Goldtips are not exported to Switzerland, if i have to order them online in the US, the Shipping fees are about $34 for a dozen ... that's half the price of the arrows ... CE definitly cheaper for me.

Dragon : Yeah, the color choice is very limited, will go in my archery shop on thursday to check EVERY nock type there.

The main problem is that CE does not publish ID of the shafts ... and that i do not have the equipement to check the ID precisely on the shafts i have.


thank you all for your help.

++M
Title: Re: CE heritage 75 Nock question
Post by: mand0ralen on September 07, 2010, 06:28:00 PM
hello again,

just recieved a mail from CE (reactive folks), they say that the CEHeritage 75 have a .233 inside diameter. do you know any nock compatible with such an ID ? by the way i'am not sure to understand what .233 means, is it something relative to the metric system ?

++M
Title: Re: CE heritage 75 Nock question
Post by: Celtic Dragon on September 08, 2010, 04:13:00 AM
Its .233 of an inch, so as .223 is 5.56mm quick maths means your looking at about 5.6mm.

Edit: .233 converts to 5.918mm.

HTH
Simon
Title: Re: CE heritage 75 Nock question
Post by: mand0ralen on September 08, 2010, 05:31:00 PM
hi,

Easton H-nocks seems to be .233 internal diameter ... at least i can use black ...

will check that in my archery shop.

++M