Could someone reccomend a 225 grain two blade broadhead. I do not want to use weighted inserts. I have seen the steel force heads in the 3 rivers catalog, but was wondering if there is anything else out there. Thanks
Go to Cenataur's web site. Than take a look at the Battle Axe heads. They are like 222 grains with the screw in adapters.
Assuming you are looking for a glue-on:
Aboyer Whitetail - 215g single bevel 2-blade. An absolute flying hatchet. Built like a tank. I doubt the 10g will make a difference.
I would use a 75 gr steel broadhead adapter and a 150 gr head,or 100 gr adaptor and 125 gr head.Using the steel adapter and glue on head gives a lot more versatility plus you can fine tune with lead shot it the ferrule to give you up to 15 grs more if you need it.
If looking for glue on then try ace super express in 200 grain. All of mine came in at 215 grains measured on a digital scale.
If looking for screw in and dont want to use brass inserts but dont mind using steel adapters then just grab any 160 grain glue on (Magnus I, Simmons Interceptor, Ace Standard) and glue it to a 75 grain adapter to get to 235 grains.
220 grain Muzzy Phantoms!!!!!!!
220 grain Muzzy Phantoms!!!!!!!
I'm with BILL
200-300-400 grain Team Tippits. Just a thought if you forge, you can make whatever you want ;) Doc
(http://img.photobucket.com/albums/v110/tippit/Broadheads/TeamTippitBroadheads027.jpg)
(http://img.photobucket.com/albums/v110/tippit/Broadheads/TeamTippitBroadheads020.jpg)
(http://img.photobucket.com/albums/v110/tippit/Quebec%20Quest%202010/QuebecQuest2010012-1.jpg)
So when does the draft start for the "team"?
Nice blades.
I want to thank everyone for the information. I am looking for screw-in heads.
The Phantoms are screw ins.