Trad Gang

Main Boards => PowWow => Topic started by: deertraks on May 10, 2007, 09:27:00 AM

Title: Can it be done?
Post by: deertraks on May 10, 2007, 09:27:00 AM

Guys, I have a chance to get a PSE Kudu cheap. Here is my question. Can I take that bow riser and reduce the size of the grip and slim the riser down a bit? I don't like the bulk of the grip.
Dave

Title: Re: Can it be done?
Post by: ALW on May 10, 2007, 09:38:00 AM

I had a PSE Blackhawk at one time.  My first trad. bow.  I believe it is pretty similar to the Kudu.  It also had a really beefy grip and I reduced it down some to make it a little smaller.  I didn't take anything off of any other part of the riser, just the grip.  Never seemed to affect it any.

Aaron

Title: Re: Can it be done?
Post by: insttech1 on May 10, 2007, 10:08:00 AM

Yup, no problem...just don't take it way too thin to affect the integrity of the bow...

Re-sand and spray with a can of Helmsman Spar Urethane from Home Depot in about 6 light coats of satin, and you're all done!!