Trad Gang

Main Boards => PowWow => Topic started by: Cane Knife on July 01, 2010, 06:02:00 PM

Title: Ace hex heads
Post by: Cane Knife on July 01, 2010, 06:02:00 PM
I shoot 160 g Stos broadheads and wanted to pick up some small game heads to full around with and stump shoot.  I like the Ace Hex heads but notice they only come in 150g or 175G (glue ons).  Would you guys recommend I go with the lighter or heavier ones?  Thank you for your advise.
Title: Re: Ace hex heads
Post by: COMPOUNDLESS IN CONCRETE on July 01, 2010, 06:32:00 PM
I am not sure you would notice the difference in weight either way.  A difference of 10-15 grains is not much at all.
Title: Re: Ace hex heads
Post by: ChuckC on July 01, 2010, 07:48:00 PM
If you want, add 10 grains to the lighter one by stuffing some lead shot inside the ferrule area.

ChuckC
Title: Re: Ace hex heads
Post by: Fletcher on July 01, 2010, 07:50:00 PM
Cane, you must have been reading a misprint.  The Hex Blunts come in several weights, incl 145, 160 and 175 grains.  I use the 160's a lot and keep them in stock.
Title: Re: Ace hex heads
Post by: lpcjon2 on July 01, 2010, 07:52:00 PM
I have 160's and I love these heads!
Title: Re: Ace hex heads
Post by: Rick Butler on July 01, 2010, 08:17:00 PM
I shoot STOS 160's and the 160 gr hex heads
Title: Re: Ace hex heads
Post by: Jeremy on July 01, 2010, 09:10:00 PM
I shoot the 160 hex heads too
Title: Re: Ace hex heads
Post by: Cane Knife on July 02, 2010, 03:48:00 AM
I pretty much only know 2 of the well known suppliers and they don;t show any 160's.  "Fletcher", I went to your website (I get the name now-COOL!) but didn;t see any place to order the heads.  160's would make this a whole loe easier.  No one carries much trad stuff here.
Title: Re: Ace hex heads
Post by: Cane Knife on July 02, 2010, 04:22:00 AM
Thanks guys I found some at Lost Nation.  This will be much easier.  I thought what the Kustom River shops sold were everything made.
Title: Re: Ace hex heads
Post by: Jason R. Wesbrock on July 02, 2010, 09:02:00 AM
When in doubt, you can always buy them directly from Ace off their web site.
Title: Re: Ace hex heads
Post by: michaelschwister on July 02, 2010, 11:26:00 AM
GO to the ACE site.
Title: Re: Ace hex heads
Post by: Mike Vines on July 02, 2010, 02:13:00 PM
I used the 160 grain Hex Head to take the goose in my avatar pic.