What types of nocks are you using with your AD.
Both the standard AD nocks and Easton with uni bushing.
I know theres a few options. I've been using the standard AD nocks also. I've had a few pop out on some hard hits so I made some nock collars out of a bigger dia. carbon shaft. How well do the Easton nocks stay in the uni bushing?
I use Easton ACC 3-28 uni-bushing or G bushing from 3Rivers and use a large groove G-nock on all my AD's.The large groove .098 G-nock fits my strings and I feel epoxying in the uni-bushing helps strengthen the nock end of the shaft.
:archer:
I buy the glue in nock adapters and use standard classic index nocks.
I love AD's but havnt been crazy about thier nock system.I have used the AD nocks and had same problems as you.I tried the cones and wasnt crazy about those due to nocks not being true.I have the new un-bushing that take the Easton "G" nocks.Awesome combonation to the AD's.I changed all mine. Very happy now.
I installed the nock inserts and use 9/32 glue on nocks.
I have been wanting to try the nock inserts or the uni-bushing but haven't bought any yet.
I have had pretty good luck with using the AD nocks, but I put one or two coats of contact cement on the shank of the nock and let it dry before inserting it into the shaft. It makes the nock fit tight and prevents it from turning.