I have a dozen GT shafts and ordered 5/16 50 grain brass inserts. I know the I/D of goldtips is a little bit larger than most other carbons. The inserts just fall into the shaft with no effort. Will this be ok? Just wondering before I glue them in.
I don't have any problems with them. Glue takes up some space. They spin and fly good for me. I use hot melt so if they don't I can adjust.
Shawn I've been using the 5/16 brass inserts for a few years now, they have always fit pretty much that way. I use Gorilla super glue (impact-tough),I sand the insert just a little and the shaft, and clean with lacquer thinner. :thumbsup:
that makes me feel better. thanks for the help.
I just mounted a dozen of the exact inserts in some gold tip 5575's with great success. Spin perfect. You'll be fine.
QuoteOriginally posted by redant 60/65:
Shawn I've been using the 5/16 brass inserts for a few years now, they have always fit pretty much that way. I use Gorilla super glue (impact-tough),I sand the insert just a little and the shaft, and clean with lacquer thinner. :thumbsup:
X2