I have purchased some "Traditional only arrows "From three Rivers I put the inserts in(6) without paying close attention ,And the arrows are .600 But the inserts have a bevels edge ,The edge bevels back to the arrow instead of the reverse ,I purchased these for my 35# I did want the 600 ,But I'm wondering if they gave me the wrong inserts so I have not shot them .
Is this normal ,And has anyone had any problems shooting the .600 "Traditional only "And getting them to pull out of the target.
Thanks for your help here's a couple photos
Carl
(http://i129.photobucket.com/albums/p213/BowNow/IMG_0742.jpg)
(http://i129.photobucket.com/albums/p213/BowNow/IMG_0741.jpg)
(http://i129.photobucket.com/albums/p213/BowNow/IMG_0740.jpg)
Carl,
Those look the same as my 500's do. I think they look fine. Hope this helps.
Rod
Are they beveled like that so the collars will fit behind them, like a footing?
My guess is better tip fit and easier removal from targets. I don't know about the collars.
Are the heads you are using the same diameter as the flared end of the insert?If so leave it alone if not you may be able to get an adapter.
they are as they should be.
The inserts are fine. If the bevels were reversed, you wouldn't be able to get them back out of a target.
Thanks guys , I have heard good things about the arrows, they should work out, just have to get the right wt up front for the 36# @ 29"
Thanks
Carl