Just wondering if anybodys ever tried cutting off the glue on nock end so reg nock will insert. These are Sitka shafts I'm talking about.
I use sitkas and they came from ABS with your regular carbon type knocks, the ones that are tunable but I was using different colors than yellow and white for my knocks so I use the glue on adaptor Ed told me there was about 2 inches of strait shaft on the knock end so you should be able to us ABS knocks if you would like to
I do..i cut down Alaskan and use a different push in nock than what they sell.I also use a Firenock and cut from nock end also..I cut 1 1/8" back is my magic spot. you will not hurt anything
I was wondering this myself, mine keep popping out.
The inserts pop out, too. Gotta use epoxy.