Trad Gang

Main Boards => PowWow => Topic started by: woodsman 365 on April 27, 2010, 07:11:00 PM

Title: 4" or 5" feathers
Post by: woodsman 365 on April 27, 2010, 07:11:00 PM
Which fletching would work better at 10 to 15 yds for a hunting setup. I have 2018s with 3x4" 5/8" high feathers and 3x5" 9/16 high feathers. Right helical. Arrows are 29" with 150gr 4 blade stingers.
Title: Re: 4" or 5" feathers
Post by: Bowwild on April 27, 2010, 07:15:00 PM
My son's arrows are 29 inches long out of a 52# recurve. His draw length is 28 inches.  He gets terrific broadhead flight with 4" feathers. I do so also but my arrows are 28 inches and I shoot only 26 inches from 45-48# bows. Both of us use Beeman MFX 600 carbons. I use 75 grains of extra weight (inserts) he uses only 25 grains of extra. I used 5 to 5.5 inch feathers for a long time. Turns out I didn't need them that long. Having said that, longer feathers don't hurt much and might correct a poorly released arrow a bit quicker?
Title: Re: 4" or 5" feathers
Post by: jcar315 on April 27, 2010, 07:21:00 PM
I am a big fan of the 5.5" feathers. For a hunting set up for 10 to 15 yard shots "speed" should not even be a consideration.

The 5.5" size is much easier for me to see at any distance. I am not that discerning enough of a shooter to notice any real difference but being an instinctive shooter I like maximizing what I can see.

What works for one doesn't mean it works for everyone though. That is what makes Trad hunting great!
Title: Re: 4" or 5" feathers
Post by: woodsman 365 on April 27, 2010, 08:47:00 PM
Thanks, I'm going to try both with a broadhead but will use the 5" if it flyes good.
Title: Re: 4" or 5" feathers
Post by: justin ammons on April 28, 2010, 10:28:00 AM
I can hear a difference.  The 4" is noticeably quieter IMO and that is way more important to me than speed.  I go with three 4' feathers myself.
Title: Re: 4" or 5" feathers
Post by: Night Wing on April 28, 2010, 11:28:00 AM
Fletch two arrows with both setups and see which one you prefer. I like three, 5" myself.
Title: Re: 4" or 5" feathers
Post by: WestTnMan on April 28, 2010, 11:35:00 AM
I shoot 4-4" and have for a while. Very satisfied with how they fly.
Title: Re: 4" or 5" feathers
Post by: Ragnarok Forge on April 28, 2010, 01:49:00 PM
4 - 4 inch gives roughly the same surface area as 3 - 5 inch.  They also have less cross wind drag to impact arrow flight due to the fletch orientation and shorter lengths overall.  Both will work great for you.
Title: Re: 4" or 5" feathers
Post by: LKH on April 28, 2010, 02:10:00 PM
I'm with RagnaroK.  I hunt open country with windy conditions the norm.  I prefer the smaller feather since they are less affected by crosswinds.
Title: Re: 4" or 5" feathers
Post by: 3arrows on April 28, 2010, 05:07:00 PM
If you cut or burn em,you will get a lot more 4s than 5s.5 inch is for the ones who don't bare shaft.
Title: Re: 4" or 5" feathers
Post by: Curveman on April 28, 2010, 05:16:00 PM
I have both in my quiver right now thanks to a friend who refletched for me in 4" when I already had 5. I truthfully don't think it matters at hunting distances. Were I to go for a world flight record I might research such matters but in hunting situations, no. Over thinking it.
Title: Re: 4" or 5" feathers
Post by: wingnut on April 28, 2010, 05:50:00 PM
I've gone from 5" trad cuts to 4" naners this year on my EFOC carbons.  They are a bunch quieter and shoot like a dart.

Mike
Title: Re: 4" or 5" feathers
Post by: shedhunter on April 28, 2010, 06:51:00 PM
another vote for 4-4"
Title: Re: 4" or 5" feathers
Post by: reddogge on April 28, 2010, 07:31:00 PM
You say tomato and I say tomahto.  That's about the size of it.
Title: Re: 4" or 5" feathers
Post by: BOWMARKS on April 29, 2010, 06:53:00 PM
4" works great for me 3-4" or 4-4" if you want to save a few dollars and start chopping your own you will get 2-4" out of a full length feather as only 1-5" out of a full length!!  

Big $$$ savings   MARK
Title: Re: 4" or 5" feathers
Post by: beachbowhunter on April 29, 2010, 07:08:00 PM
I find 4" works great with Stingers.  They don't need a lot of steering on a properly spined shaft.
Title: Re: 4" or 5" feathers
Post by: woodsman 365 on April 29, 2010, 07:54:00 PM
I tried 4" and 5" and can't say I see a difference at 15 - 20yds. Thanks again for your input. >>>> RAY
Title: Re: 4" or 5" feathers
Post by: Earthdog on April 30, 2010, 03:07:00 AM
I've tried everything at lest once or twice.
Today I'm shooting 3x4" helical,and 3x2" Rayzars fletched straight.
Get exellent performance and very happy with both.
Title: Re: 4" or 5" feathers
Post by: CEO on April 30, 2010, 02:17:00 PM
Unless your arrows have directional thrusters, there are only two ways to increase stability. According to NASA, "You can increase the stability by lowering the center of pressure, increasing the fin area, for example, or by raising the center of gravity, adding weight to the nose." I vote for smaller fletching and heaver point. Less overall drag and faster arrow.
Title: Re: 4" or 5" feathers
Post by: BRONZ on May 02, 2010, 04:30:00 PM
ttt.  Any other input?  I'm considering switching from 5 to 4" for 28" arrows so I can chop more out of a full length goose feather.  First try at chopping.
Title: Re: 4" or 5" feathers
Post by: monkeyball on May 02, 2010, 04:40:00 PM
I am putting a bunch together right now.Got a deal on some 3.5 parabolics that a guy had.I am going to try a 4 fletch and see what happens.......


 I would suggest not trying to get as many out of a full length,but one good one,whatever the length.
Cut, chop, or burn,where the oil line is the highest.It will be a much more durable fletch.

                                    Craig
Title: Re: 4" or 5" feathers
Post by: ranger42 on May 03, 2010, 10:48:00 PM
I'm shooting 4" parabolics
Title: Re: 4" or 5" feathers
Post by: Slomo on May 03, 2010, 11:02:00 PM
I've shot 4 4" Modified shield cut for thirty some years with many different bows and shafts and they have always worked for me. The key is what works best for you.