I've got a Ground Max Escape Deluxe that's 5 or so years old (before Primos bought them)and the fabric where it attaches to the hub is ripping out. I was just wondering how a double bull type hub is made and how the hub itself attaches (or not) to the fabric. Anybody got any close-up pictures of there hubs?
ttt
ttt
Greg, not sure on the newer DB blinds but mine are the older ones & each place were the hubs are is a tie down eye on the outside of the blind & it's reinforced on the inside of each hub with another kind of material that's alot heavier weight & this prevents the hub from wearing through the blind material....I can get ya some pictures but it may be a couple of days....
yeah, the screw / eye at each location unscrews and the hub / rods can be removed and worked on, leaving the material in place with a small hole in it for replacement of the above.
ChuckC