Print Page - ILF tiller

Title: ILF tiller
Post by: Prairie Drifter on April 16, 2010, 04:46:00 PM

I just got a used Morrison ILF bow. I shoot split finger. How should I set the tiller?

Title: Re: ILF tiller
Post by: Bob Walker on April 16, 2010, 04:56:00 PM

1/4" to 3/8" positive tiller on the top limb (that much more distance from the limb at the top of the riser to the string on the upper limb than on the bottom limb). This is just a starting point, play with it a bit until you find the "sweet spot" where the bow is quietest.

Title: Re: ILF tiller
Post by: Bob Morrison on April 16, 2010, 07:53:00 PM

You might start at 3/16" less on the bottom. You will find a sweet spot 0 to 3/8"

Title: Re: ILF tiller
Post by: Prairie Drifter on April 16, 2010, 10:09:00 PM

Thanks!!

Trad Gang

Main Boards => PowWow => Topic started by: Prairie Drifter on April 16, 2010, 04:46:00 PM