Print Page - Nock throat size?

Title: Nock throat size?
Post by: Old York on April 05, 2010, 12:31:00 AM

Merc versus Bohning Classic, which has a larger
throat? Thanks

Title: Re: Nock throat size?
Post by: joe skipp on April 05, 2010, 01:00:00 AM

Mercury speed nocks are a tad wider...

Title: Re: Nock throat size?
Post by: Smallwood on April 05, 2010, 03:56:00 PM

Title: Re: Nock throat size?
Post by: Fletcher on April 06, 2010, 01:06:00 AM

I shoot 5/16 in both styles and would have to say my old Mercs are a little tighter than the Bohning Classics. The string that gives a perfect fit on the Bohning is tight at the bottom of the Merc's throat.

Title: Re: Nock throat size?
Post by: Traxx on April 06, 2010, 03:02:00 AM

I agree with Fletcher

Title: Re: Nock throat size?
Post by: hvyhitter on April 06, 2010, 12:45:00 PM

You are going to find differences even with the same size and make. My 11/64 flo.green bohning classics are noticably tighter than the same size in solid yellow. The white ones I have are somewere in between.

Title: Re: Nock throat size?
Post by: Shakes.602 on April 06, 2010, 12:53:00 PM

You can skinny the Classics up with a Bit of Warm Water, and Gentle Squeezing! :thumbsup: Just Not Too Tight!! :archer:

Trad Gang

Main Boards => PowWow => Topic started by: Old York on April 05, 2010, 12:31:00 AM