Trad Gang

Main Boards => PowWow => Topic started by: hunterjt on March 29, 2010, 06:52:00 PM

Title: Have to make a choice
Post by: hunterjt on March 29, 2010, 06:52:00 PM
What should I do? I really like this bow and can get a deal on it. I'm looking at a bow 64 66# 30"draw. I shoot 28 draw but wondering can I get this bow and still shoot it ok at my draw.  :confused:  don't need the other 2 inches I know i will be pulling less weight,guessing around 59 60 lb. Your thoughts  :help:
Title: Re: Have to make a choice
Post by: James on laptop on March 29, 2010, 07:02:00 PM
Well of course the bow will shoot fine at your draw length.It should be around 58#s.  :confused:
Title: Re: Have to make a choice
Post by: JRY309 on March 29, 2010, 07:33:00 PM
Normally use loose or gain around 3# per inch,I think you would be closer to 60#.Sure you can shoot it,I had a bow that was 65#@30 and it shot fine at my 27" draw.Normally trad bows are marked at 28" draw unless some one ordered it differently.There are guys shooting bows marked at 28" with longer and shorter draws,they all will shoot fine just tune your arrows to your bow and draw length.
Title: Re: Have to make a choice
Post by: Michael Golden on March 29, 2010, 08:06:00 PM
It will shoot just fine, go and buy it.......
Title: Re: Have to make a choice
Post by: bolong on March 29, 2010, 08:14:00 PM
Should shout fine as long as the shafts are correct.
Title: Re: Have to make a choice
Post by: glass76 on March 29, 2010, 08:22:00 PM
As already said, tune shafts to your draw length should be good to go.
Title: Re: Have to make a choice
Post by: jerryb on March 30, 2010, 01:15:00 AM
JUST DO IT . YOU'LL BE FINE   :bigsmyl: