Had my friend Rich make a jig to drill out the center of the shaft so I could epoxy a section of nail to increase % of foc and make the shaft unbreakable behind the broadhead. It works great, by adding 2 and 1/4 in section of nail I have added 90 grains. Pictures and % foc to follow when I have time to download pics.
Would like to see it.
Have been trying the same thing with 2in of 3/16 brass into poplar shafts. Adding 100gr up front. Havent measured FOC but it is obvious it has increased. I dont find that it increases strength at all but it could be the poplar shafts are not very durable compared to say ash shafts I have found to be very durable. It could also be the 3/16 size of my brass as well. Three of the dozen I made have already broken behind the head on hits that didnt always result in a broken ash shaft (ash having no brass insert).
I've been doing the same thing with 1/8" lead wire @ 35 gr/in. I find a 2" hole to be pretty easy and 3" to be my practical limit. GM, what size nail are you using?
Jack, nothing is going to be as tough as ash. Poplar shoots much nicer tho, and with the extra weight up front should shoot even better. I thought about trying 3/16, but that doesn't leave much wood and I find 70 grains ups my total arrow weight and FOC quite nicely. If I want more, I just go to a heavier head.
I killed a 125 lb dressed boar pig a few weeks ago with a Sitka Spruce arrow. It had 1.5" of lead for 50 grains plus a 190 gr VPA Terminator for a total arrow weight of 620 gr and an FOC of 20.6%. Hit it at the last rib and the arrow stopped in the opposite foreleg, pinwheeling the heart on the way thru.
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=074175
I had the same Idea but haven't tried it yet. The tapered end on the nail would help keep it from breaking at the insert. You could even put it on a grinder and do even more. It would make your arrows "tough as nails"
Fletcher
Yes I was going for 300 grains total up front, 190 point/broadhead then 100 gr brass. My poplar shafts were coming in at around 550 I wanted 650. So I was adding the brass. I believe it may be the 3/16 dia hole. I may foot the shafts first then only add 50 grains or so could get away with smaller dia brass rod then or a nail.
Its a lot of work though considering my plain ash shafts are almost indestructable.
the internal footing/weight jig originally came through braveheart archery, now sold by 3 rivers. works great! if you don't want to add front end weight, you can stiffen up the front end for behind-the-head breakage protection by gluing in 1/8" hardwood dowel, bamboo, or (my new fave) 1/8" carbon fiber rod.
I did 4 doz. today 1 poplar, 1 tamarac, 1 cedar, and 1 cherry, putting finnish on right now. Can't wait to see how they shoot. Will post pics tomorrow.
I've been doing the same on my cane shafts for the past 6 months with very good results.
Don't need the tapering jig as the bit will follow the path of least resistance.
1/8" nail generally adds 90 to 100 grains.
The nice thing is that if you group your shafts to within 10-20 gr, you can actually end up with perfectly weighted shafts by playing with the nail. And it won't effect the FOC by a large enough % to tell the difference.
Do you match your foot to the shaft with a blunt connection (+nail) plus glue, or, do you taper the foot & counter taper the shaft first?
Here is a link to the 3Rivers
http://www.3riversarchery.com/Product.asp?show=rate&c=52&s=8&p=71&i=5603X#full
Here is a link to a how to.
http://gmsarcherytools.blogspot.com/
Kustom King and Lost Nation will also be carrying the EFOC Jig soon.
Wilderness Dreams will be carrying them as well.
Andy
(http://i837.photobucket.com/albums/zz297/Bowworks/foc%20arrows/DSCF0126-3.jpg)
I have been going back and forth from photobuket to tradgang for over an hour trying to resize these %^#$# pictures to post I edit in photobuket resize then replace the original then copy the url code paste it here and the picture shows up large. What am I doing wrong, this is almost to much of a pain to post a pic here.
QuoteOriginally posted by Granite Mtn:
I have been going back and forth from photobuket to tradgang for over an hour trying to resize these %^#$# pictures to post I edit in photobuket resize then replace the original then copy the url code paste it here and the picture shows up large. What am I doing wrong, this is almost to much of a pain to post a pic here.
read the tutorial on resizing photobucket images ...
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=5;t=028257
(http://i837.photobucket.com/albums/zz297/Bowworks/foc%20arrows/DSCF0131-2-1.jpg)
I think I figured this out but very cumbersome to post pics here. I finally got a couple minutes to set down to post, so here are the stats. The % of foc is between 14 and 15 %. I took the arrows out for a little stump shooting yesterday and can tell a big diff in arrow flight and penetration over similar 610 grain maple arrows I was shooting as a control group. Had to use a hatchet to remove poplar arrows several times out of stumps the maple shafts bounced off of or hardly penetrated. I did brake one of the poplar shafts right behind the footing on a glancing shot so more testing is required to get a better feel for durability. I will be shooting some doug fir at moses lake next month that will really test the durability of the internal footing shaft conection.
Thanks Rob,
That is exactly what I did but when I post sometimes the picture gets bigger for some reason.
(http://i837.photobucket.com/albums/zz297/Bowworks/foc%20arrows/DSCF0127-3.jpg)
Mid point of arrow from throat of nock to back of head is 13 1/2 in.
now yer cookin' good, chris - both with yer arrows and yer image posting! :thumbsup:
one more quickie rap about how to resize and post images via photobucket.
i uploaded a very wide 1024 wide image to photobucket and named it '1024.jpg', here's how it looks in my photobucket album ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_1.jpg)
... looking at the above image, when in photobucket just click on the mini menu item 'edit' that's right above your image and here's where yer sent ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_2.jpg)
... click on 'resize' and now you'll see ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_3.jpg)
.. change the '1024' image width to '640' (you can instantly see your image reduced in width) ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_4.jpg)
... go to the bottom of that page and click on 'Save a copy' ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_5.jpg)
... go back to your photobucket album, and now select the copy you just made ('1024-1.jpg'), copy the 'img' code ...
(http://img.photobucket.com/albums/v82/rfdee/archery/image_edit_6.jpg)
... paste it into your trad gang post ...
(http://img.photobucket.com/albums/v82/rfdee/archery/1024-1.jpg)
sweet arrows, thanks for help, I was selecting rplace original. Sometimes it would be ok some times it would post large I still don't understand why but I will figure it out eventually.
Does anybody know how much weight to add to the back of an arrow to increase the spine five pounds? Gary