(http://www.morrisonarchery.com/assets/images/ILF-Metal-16-in-Riser.jpg)
They just came in today and are ready to go.
Care to share a little more info about them?
Sweet! :thumbsup:
I like that lowered plunger hole. I used to shoot my das with a shelf/plunger combo but I always had to build the shelf up a bit with abs.
How short of a recurve can you make with this riser?
What is "ILF"? :( :rolleyes: :(
ILF means International Limb Fit,you can get limbs from many different manufacturers.You can any ILF riser to use any ILF limbs.
Fido,
ILF means International Limb Fitting system and is a (even though not defined) standard that most manufacturers use to make their risers and limbs interchangable. So you could use a riser from X-company and put on limbs from Y-company.
Hey Bob,
cool looking riser.
Blacky
Oooooh.....I see. I've seen it a bazillion times, but just never knew.
Thanks!
What is the cost and can it be shot off the shelf?
what anw0625 said...
I have no idea about the cost, yet, but it can be shot off the shelf. It's pretty much like all the other risers with a flat shelf. You can use felt pads from Wal-Mart and put one on the shelf in conjunction with a low berger button. Or you can use two felt pads.
The picture shows, how to fix the pads. I found that pic at the Pirate's forum.
Blacky
(http://www.archeryconsulting.com/pictures/felt-pad-rest.jpg)
Yup, I used to use a shelf/plunger combo. The shelf was tougher than the flipper and the plunger allowed for more fine tuning and aided in release errors. I shot my 1st generation das bows like that.
Yes it can be shot off the shelf,The lower hole is for a plunger for off the shelf, I'm not sure if you can it but the shelf is radiused. Riser without A grip is $395.00. I have low and med grips comping from Jager, They will cost $35.00 or you can use any Hoyt grip.
that is great plunger with off the shelf
QuoteOriginally posted by Blacky:
I have no idea about the cost, yet, but it can be shot off the shelf. It's pretty much like all the other risers with a flat shelf. You can use felt pads from Wal-Mart and put one on the shelf in conjunction with a low berger button. Or you can use two felt pads.
The picture shows, how to fix the pads. I found that pic at the Pirate's forum.
Blacky
(http://www.archeryconsulting.com/pictures/felt-pad-rest.jpg)
Looks to me like a guy could shoot vanes off that(if he really wanted to)
I still hadn't figured out who makes that riser. I like the looks of it.
Bowbldr-Bob Morrison-Morrison archery.
Looks very nice. Now I have to decide between the 14 and 16 inch version.
Bob, is it painted or anodized?
looks good Bob. The double plunger holes are a nice feature.
Pete
Hard Anodized black.I have some that will be camo dipped to customer specs.