Trad Gang

Main Boards => PowWow => Topic started by: hydrasport205 on February 24, 2010, 09:04:00 PM

Title: bear kodiak hunter brace height
Post by: hydrasport205 on February 24, 2010, 09:04:00 PM

hello all  just got a bear kodiak hunter from **** and was wanting to know what brace height  most of you use..  mine was made in the 70s i think it is green with the blue accent stripe serial #kh03502 amo 60"

Title: Re: bear kodiak hunter brace height
Post by: Cody Schnettgoecke on February 24, 2010, 09:06:00 PM

My 68 Kodiak Hunter likes a 7 1/4" -7 1/2" brace height best. Hope this helps.

Title: Re: bear kodiak hunter brace height
Post by: fireball31 on February 24, 2010, 10:29:00 PM

8-8 1/2 for that model.  I've got one myself and it certainly prefers the higher end.

Title: Re: bear kodiak hunter brace height
Post by: Blackstick on February 25, 2010, 09:09:00 AM

Just checked my 1970 KH and it is set at 8 1/8".

Title: Re: bear kodiak hunter brace height
Post by: Tom on February 25, 2010, 09:12:00 AM

My Bears prefer 8"-8 1/4".

Title: Re: bear kodiak hunter brace height
Post by: George D. Stout on February 25, 2010, 09:21:00 AM

A good starting point is 8".  You may go lower or higher, but you need to make it fit your comfort zone.  As you can see....there is a pretty wide variety here already. Pick the spot that is quietest for you and feels good on the shot.  It's not an exact science.  8^).

Title: Re: bear kodiak hunter brace height
Post by: illianabowhntr67 on February 25, 2010, 02:40:00 PM

Mine is set at 8" but I don't know much. I'm still learning.Go with what George said.