Hey yall, was just wondering about broadheads as my new Kustom King catalog got here yesterday. Up till now, I've been planning on some 200 gr. Grizzlys to get some weight up front, but have heard they're a real "bear" to sharpen. So I started lookin, and wondered if them Zwickey No Mercy's with a woody weight would work as effectivly. Would they be easier to sharpen? And how well do them Woody Weight's work? Thanks!
Forgot to mention, I'm only lookin at single bevels.
Hey Not Ted.
I know it's not on the list but man I sure have had good luck with Abowyer's. They are sharp out of the box, come in lot's of weights, not tough to sharpen and fly great. Just my .02
Paul
I own and shoot both, the 160 grizley with 75 gn steel insert and the 130 single bevel No Mercy [ with 100 gn steel insert]
Both are great heads. No mercy is easier to get the correct angle on and keep sharp with Lansky Sharpener. I do like the wider cutting surface....
That being said.....If you use a good file and spend a bit of time attaining the prefered 25 deg angle on the edge... The grizley is a Very Good, tough broadhead.... Stays sharp and is easily touched up on the lansky or diamond lap after the initial filing.....With the thicker overall blade width I expect it works a bit better if heavy bone is encountered.
I took a pretty nice Muley Buck this year with a No Mercy and effectiveness was unbelievable.. Ribs in and out, lodged in the off shoulder, and about cut it off in the 3 bounds he was able to make after the hit. The first bound snapped the 5575 gold tip on entry side and stopped peneration.
This Buck was down and out in 10 seconds... as fast as, or faster than, many I have taken in my younger years with a 270 and showing as much or more wound dammage.
Make your choice, properly prepair the cut angle on either and rest assured. :wavey:
Thanks for the replies guys. Horne Shooter, Abowyers look awesome, but man, 50 bucks for 3 would kill me. I'm lookin at 12 Grizz or 12 Mercy's.
L.E., them No Mercy's are soundin a bit better...
Forgot to mention they'll be glue ons. :campfire:
I am using the single bevel left wing glue on No Mercy. I have had great results on whitetails. Killed six deer with these heads without any problems. I have no problem getting the heads sharp. Good Luck
Seems to be some misinformation floating around out there. The new Grizzlies are beveled at 25 degrees. No need to rebevel them. They're also thicker than no mercy so the cutting edge is wider. And,they're true single bevel the full length of the blade. No mercy's are triple laminated near the tip, which makes them a double bevel for the first third of their length. In short, the first third of the head doesn't contribute to (and may actually detract from) the head's turning as it enters tissue.
I've shot a lot of Zwickey double bevels for the past 30 years. They're excellent heads. But the no mercy just isn't a good single bevel design. The Grizzly is a much better single bevel head. That being said, I'm shooting Abowyer single bevels because they're thicker yet, and there's a much better edge on them out of the box. However, I would have no compunction about shooting Grizzlies at anything.
I agree withorion. The new heads are already ground and they have that long and lean taper to. The steel in the head is stronger too in grizzles. The no mercy head just seems to flimsy for me. My vote goes to the el grande hands down.
Orion
I was giving info on the Grizley's I have on hand and am familiar with....by that, they are the older "origional" single bevels. Mine did not come with the factory 25 Deg. bevel... granted they, or at least mine, are a full double thickness "full length" bevel and thicker than the No Mercy....But in the post mortum I preformed on my last buck.....the No Mercy DID ROTATE going thru the body..and that was with Rib contact both upon entry and exit !!!
I'm not trying to pass on "Misinformation" to anyone....I'll back off on my posts and leave all of this question and answer stuff to you "Experts" :wavey: :notworthy: :coffee:
gene, I will say the the effort is worth the reward on the grizzers. I got mine to the twentyfive degree with a diamond sharpener and about six hours apiece. That was out of the box to shaving on both sides. It took forever, but if the new ones weren't here I would do it again. The good thing is they stay sharp. I passed through a turkey and could still shave a bit.
Okay, I didn't realize there were new grizzlies but I just looked in my KK and by god it says, *New*. That may have made up my mind there as the main thing keeping me away was the sharpening difficulty. Thanks to all who replied, I appreciate it. Still have some time to decide before next fall too.
yup, go w/ griz
hello folk's
everybody is right here :thumbsup:
but i never shoot wood so i can't help you about the woodie question :confused:
I prefer the No Mercy.'s larger cutting diameter...and yes they WILL/DO rotate same as a grizz.
L.E., I misunderstood one of your comments about the wider cutting edge. I thought you meant the size of the bevel on the blade. Upon re-reading, it's clear that you were talking about the blade width. Yep. Zwickeys are a bit wider.
Trapper, I wasn't suggesting that the No Mercy's don't rotate, just that they' may not be as efficient as they could be because they are not single bevel their entire length.
My son tried the no mercy last year, shooting a 51# PGA at his draw 26 1/2" with a 2016 legacy and a sharp no mercy shot into a piece of marine plywood at 30 yards 3/4" thick, the no mercy had 3/4's of the blade sticking out the far side and the cut was in an s shape, that opened my eyes too single bevels.For deer I would say the no mercy is plenty if I was going too africa, or for moose I think I'd go with a Grizz.
Ounce the initial bevel on the Grizzleys of 25 degrees is obtained they are much easier to sharpen. I had Ron at KME do that first grind for me. They are a real nice head.
QuoteOriginally posted by jbuck9:
For deer I would say the no mercy is plenty if I was going too africa, or for moose I think I'd go with a Grizz.
I don't know... Denny Sturgis Jr has taken a couple of water buffalo with the no mercy and I was with him when he shot a Canadian moose with a no mercy this last fall in B.C. Seemed to work just fine on those large animals too. I wouldn't hesitate using one myself. dino
Now ya'll er gettin me back to the No Mercy's. :bigsmyl: Sounds like I can't do bad with either head. Maybe six of each. :biglaugh:
six of each wouldn't be a bad idea.I have never shot a ne mercy head so I can't speak for them. After seeing the damage of a singlebevel head I would be hard pressed to switch. If I ever shoot another head it will be one of the heads from abowyer I think. Still single bevel head though. Just make sure it is sharp and in the right place.
I've been looking at the No Mercy bhs also...are they about as thick as the 130 grain STOS?
Mike
Just got a shipment from Kustom King last week....they sent the old style. Very nice company to deal with, but if you advertise new you should send new.
K. Mogensen,
I just got some Grizzly 200s in the mail today. Within about 6-8 minutes I had one edge of one broadhead shaving sharp. If I'm lieing..I'm dieing. And I didn't loose even one grain of weight.
The new Griz have the new bevel and it is amazing how easy it was for me to sharpen.
It is one bad mamma jamma and would certainly leave a mark.
why aren't we fighting about this? It seems like everyone is saying they are both good heads... Oh right I'm not on those other sites. :-) if you buy the no mercy heads in right wing and ya don't like em, I will trade you some of my grizzers for em. I want to try em but don't want to buy em.
"I want to try em but don't want to buy em".
Poet and didn't know it.