i just bought a caribow tuktu from rnharris and wow what a shooter she is,fast and very smooth,whisper quiet.busted up four of my best damn arrows with it after i tuned it in to my liking.question:it had skins on it and i removed them to either replace them or leave the zebra wood underneath to show.how do i get the old glue off without hurting the wood? sanding? heat? chemicals?.it looks like the glue is pretty flaky and some i was able to peel by hand but the rest is on good....thanks...larry
a product called jigaloo has worked well for me it is like wd40 put works well as a modest stripper and it doesnt smell bad or seem to take off the orginal finish good luck, bowdoc would maybe know better he hangs out in trad history maybe pm him for more advise
Don't use chemical strippers. (The jigaloo or something similar to WD40 is fine) Also don't use heat. Basically, you don't want to use anything that would affect the glue used in the limbs. Heat and chemicals could do that.
You might have to do the sanding, but it isn't that bad. The glass is on top of the wood, so you won't get down to that. Just be careful, go slow, and keep everything even. 100 grit should take it off quick. You can use a rattle can finish if you want. Before setting up a spray booth I've used Deft with pretty good results.
thanks joe...i bought some different grades of flexible sanding sponges to try and make her good as new...either outcome i'll post pics of it :bigsmyl: do you think wetsanding will be better or dry?
well...i got er done..i used a sanding sponge under running cold water and the glue actually started coming off in chunks...pretty easy once i got started...still took the better part of an hour....thanks guys