Trad Gang
Main Boards => PowWow => Topic started by: K. Mogensen on January 14, 2010, 09:49:00 PM
-
Hey ya'll,
Gotta question about the above mentioned fletching jig. I want to try some 4 fletch on some arra's. Can you do this with the Jo Jan "out of the box" or do you need to buy a seperate indexer? And what degree can you get their indexer in? 90 or 125,75 or both? Thanks and pardon the ignorance.
-
On My multi fletcher You take the nock indexer out and flip it around. There are little dimples that lock in position. 3 on one end 4 on the other.Hope this helps.
bretto
-
The nock receiver on the Jo-Jan flips and will do 3 or 4 fletch arrows, nothing extra to buy. It does 125/75's I believe.
-
Yup, it will do 4
-
It will 4 fletch, but only 105 x 75. If you want 90 you will need to get a Bitz :)
I have both the bitzenburger and the jojan multi... love them both but use the jojan more often to tell you truth.
-
Not true-My Jo-Jan will do 4x90. You can buy them either way. Hap
-
Hap nailed it the stadard nock reciever is three fletch or four fletch 105x75 (depending on the direction you put it in) but you can purchse the three fletch 4x90 as an add on!
-
Sorry about that, I stand corrected! I did not know that you could get the nock receiver for the 90 degree 4 fletch... learn something new everyday :thumbsup:
-
Thanks!
-
It will do 4-105x75,if you want 4-90 you will need to get their TM nock reciever that fletches cock feather up or down and it has the 4-90 on the other end.
-
That's not true either. Mine will do 4x90 and a regular 3 fletch w/cock feather out. You can get the Jo-Jan in 4 different configurations. Hap