Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Coccobill on December 16, 2009, 11:55:00 PM

Title: Great Northern T/D Quick Mount
Post by: Coccobill on December 16, 2009, 11:55:00 PM
Can I use this quiver on a Martin Hatfield take down bow? Do I need different bolts?

Thanks
Title: Re: Great Northern T/D Quick Mount
Post by: JRY309 on December 17, 2009, 07:57:00 AM
Which GN are you talking about,they have a Quick mount that attaches with thumb screws to the side of the riser with quiver bushings.And the have a limb bolt quick mount too,you put brackets under the limb bolts and the quiver can be attached and removed easliy.
Title: Re: Great Northern T/D Quick Mount
Post by: Coccobill on December 17, 2009, 10:10:00 AM
The second one that is called (like in my title) Quick mount. Do I need different bolts?
thanks
Title: Re: Great Northern T/D Quick Mount
Post by: JRY309 on December 17, 2009, 11:54:00 AM
The bracket should fit right under your stock limb bolts,then you can attach and remove the quiver without breaking the bow down.I have used it on other T/D bows with the same limb bolts.Just make sure your bolts on the Martin are long enough.
Title: Re: Great Northern T/D Quick Mount
Post by: LP Kelley on December 17, 2009, 11:57:00 AM
The Quick Mount is 3/16" thick.
Title: Re: Great Northern T/D Quick Mount
Post by: bshunter on December 17, 2009, 12:17:00 PM
I had one briefly...and I don't think I had to use different bolts, nice quivers.
Title: Re: Great Northern T/D Quick Mount
Post by: John Kennedy on December 21, 2009, 11:07:00 AM
I have one for a black widow,it does have slightly longer bolts,and a bushing to make up the difference between the limbbolts and bracket difference in diameter.
Text only | Text with Images