ok picked up my string mat at the store today and am going to the garage to get me a board to m ake a jig and just so you fellas know it's gonna be on like donkey kong lol.
might post a pick of the new board bow and string when i gte them mated up thats if all goes well lol.
any suggestions before i get started ?
any pointers ?
thanks,
Scott
Don't fret if the first one isn't perfect. If it doesn't come flying apart then it is great!
The key to remember is twist one way, wrap the other.
after a while you be doing fine, knowing how and when to fudge on the length of the jig based on the width of the bow limbs that need a bigger loop
Dacron can be frustrating! But if you take your time you can twist strings...just as Larry stated. My first one looks like death warmed over and then deep-fried! But I have built a lot since then.
Dacron wants to fight you the whole way through the process...it has a lot of wax and if your hands start to get hot and sweaty they'll make the bundles slippery. It doesn't want to stay the way you twisted it so keep a good grasp on what you have twisted as you make the loops and as you fade the strands out after you fold it over. Keep your cool and make sure you get some sort of very sticky wax.
It can be done!
Josh
I almost forgot...
Some of the things I found acceptable while learning to build strings:
It's totally fine to curse while learning! :mad:
Feel free to burn the messed up strings, it will make you feel better (really)! :readit:
You will get better with time...build everyday if you can! :thumbsup:
Josh
thanks guys and i did a little curseing got one side done looked great and held did the other end not so well took me 4 times to get it to hold but it held all night and i ebven pulled the bow several times just to make sure so will see after i get everything else squared away ,
thanks ,
Scott