Print Page - skinny carbons/bow quiver?

Title: skinny carbons/bow quiver?
Post by: tradtusker on September 30, 2009, 05:41:00 PM

changed over to shooting the skinny Beman MFX shafts but find my bow quiver is not gripping them tight enough and they slip out, are there any replacement grippers made for skinny carbons? if so who sells them? anyone else had this problem

the quiver i have is a boa bow quiver from 3 rivers

thanks Andy

Title: Re: skinny carbons/bow quiver?
Post by: tukudu on September 30, 2009, 07:03:00 PM

Andy,
Go buy a foot of latex tubing and just cut 1/4 in or slightly larger pieces and you can slip over arrow retainer. tom

Title: Re: skinny carbons/bow quiver?
Post by: frankwright on September 30, 2009, 07:14:00 PM

Andy, 3 rivers and most other places sell replacement grippers for the thinner shafts. The metal channel that holds the rubber gripper is the same size on many different quivers so I have found they all pretty much fit.
You can also do as tom said and get either a piece of latex tubing or some of the tiny rubber bands used on teeth braces and slip them over each leg of the gripper.
Good Luck!

Title: Re: skinny carbons/bow quiver?
Post by: zipper bowss on September 30, 2009, 07:29:00 PM

Andy you have a pm.
Bill

Title: Re: skinny carbons/bow quiver?
Post by: A.S. on September 30, 2009, 07:37:00 PM

Thunderhorn sells rubber spacers to put on your grippers so they hold the skinny arrows. Black Widow carries them as well.

Title: Re: skinny carbons/bow quiver?
Post by: tradtusker on September 30, 2009, 07:44:00 PM

thanks guys
Bill ill give you a shout

Trad Gang

Main Boards => PowWow => Topic started by: tradtusker on September 30, 2009, 05:41:00 PM