Print Page - Undue Krazy Glue?

Title: Undue Krazy Glue?
Post by: nate c on September 28, 2009, 02:32:00 PM

I used Krazy glue for my nock inserts this last weekend. Of the 12 arrows I had a problem with 2.

The nock wouldn't quite seat, and the glue set up so quickly I was not able to fully insert it, nor was I able to remove it. So now the insert is protruding about 1/4". Arrows are Beman Carbons. :knothead:

Is there any known way to fix this without damaging the shaft and/or without cutting the shaft down?

Thanks in advance -

Nate

Title: Re: Undue Krazy Glue?
Post by: Jeremy on September 28, 2009, 02:37:00 PM

dip the end of the shaft in a little acetone. It dissolves the glue quickly.

Title: Re: Undue Krazy Glue?
Post by: blind one on September 28, 2009, 02:37:00 PM

Acetone will do it..

Title: Re: Undue Krazy Glue?
Post by: nate c on September 28, 2009, 02:53:00 PM

Thanks very much guys.

Nate

Trad Gang

Main Boards => PowWow => Topic started by: nate c on September 28, 2009, 02:32:00 PM