Print Page - Aluminum Spine for hill big 5

Title: Aluminum Spine for hill big 5
Post by: fireball31 on September 23, 2009, 03:14:00 PM

Bow is 68" 58lbs@28" I draw 29 and have scaled it at closer to 61@ my draw. I'm leaning toward starting out with 2018's with a 175 grn tip. Any reccomendations would be appreciated.

P.S. I allready have another bow tuned up and ready to go for the season. I would just like to have a backup ready in case something unfortunate occurs.

Title: Re: Aluminum Spine for hill big 5
Post by: fireball31 on September 23, 2009, 03:26:00 PM

forgot to add that its a fast flight string

Title: Re: Aluminum Spine for hill big 5
Post by: DesertDude on September 23, 2009, 03:38:00 PM

I'll bet a 2117 around 29.5-30" would be real close depending on your point weight

Title: Re: Aluminum Spine for hill big 5
Post by: Dick in Seattle on September 23, 2009, 04:35:00 PM

2117 was going to be my comment, as well They seem to be a heck of a nice arrow for Hills in roughly that range, Between length and tip weight adjustment, you should be able to make it work. 2018 might be just as good, but I've never shot any

Title: Re: Aluminum Spine for hill big 5
Post by: hvyhitter on September 23, 2009, 05:51:00 PM

try the 2018s,your setup is close to mine and I shoot 29 1/2" 2018s with 160 to 190 up front.

Title: Re: Aluminum Spine for hill big 5
Post by: fireball31 on September 23, 2009, 09:43:00 PM

thanks a ton guys.

Trad Gang

Main Boards => PowWow => Topic started by: fireball31 on September 23, 2009, 03:14:00 PM