Trad Gang

Main Boards => PowWow => Topic started by: Schafer on August 16, 2009, 10:40:00 PM

Title: Arrow Help!
Post by: Schafer on August 16, 2009, 10:40:00 PM
Ok, so when i shoot my 3555 gold tips out of my black widow PSR. Which is 45 pounds at my draw length of 26 to 27inches using 175g field points they fly like a dart. But when i put the same weight, 125 grain magnus 2blade with a 50 grain screw on adapter to equal 175g they have the most random flight. My totall arrow weight is about 565g. I'm using 3555 Gold Tips at full length with a 100 grain brass inserts and a totall of 175grain magnus 2 blade.  

Thank you to all that help.
Title: Re: Arrow Help!
Post by: Killdeer on August 16, 2009, 10:44:00 PM
These are fletched, not bare shaft, right?

Sounds like the spine is a little iffy, and the broadheads are a little more than the tolerances will take.

Killdeer
Title: Re: Arrow Help!
Post by: Schafer on August 16, 2009, 10:45:00 PM
Yes, they are fleched.
Title: Re: Arrow Help!
Post by: GMMAT on August 16, 2009, 10:56:00 PM
Here's what I found out, this year....

You're right....put 175gr up front (utilizng a std. insert and 175gr. of tip weight up front) and bare shaft your arrow....and you may get optimal flight.

Put a 100gr brass insert and a 75gr. tip on, though....and you get "not so optimal" flight.  I had it happen the same way.

The brass insert doesn't allow the arrow to flex where the insert is installed.  So I've gotten a stiff reaction when I tried this.
Title: Re: Arrow Help!
Post by: Killdeer on August 17, 2009, 04:56:00 AM
Have you put them on a spinner to make sure that the broadhead is mounted true?

Killdeer
Title: Re: Arrow Help!
Post by: ishoot4thrills on August 17, 2009, 06:07:00 AM
Click on this link and then go to "bow tuning" and all of your questions shall be answered. Read it all and mark it for future reference.

 http://bowmaker.net/index2.htm
Title: Re: Arrow Help!
Post by: LCH on August 17, 2009, 10:33:00 AM
The arrows are too weak try 125 grain field tips and the broadheads without the 50 grain adaptor. LCH
Title: Re: Arrow Help!
Post by: Smallwood on August 17, 2009, 10:48:00 AM
Also, double check for proper nock height.
Title: Re: Arrow Help!
Post by: WildmanSC on August 17, 2009, 10:57:00 AM
Cut your arrows to 28" back of point and try again.  Your present arrows are too long and the 175 gr up front makes them too weak in spine.  If you don't want to go from full length directly to 28", cut off a half inch at a time until you are getting good, consistent flight with your field points and broadheads.

Bill