Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Flatshooter on July 25, 2009, 07:00:00 PM

Title: Brace height for Fox Breed?
Post by: Flatshooter on July 25, 2009, 07:00:00 PM
Just picked up a Fox Breed 58" 50#@28" on this site. Any suggestions for brace height on this bow? I'm thinking 7 1/4- 7 1/2" Am I close?
Title: Re: Brace height for Fox Breed?
Post by: Mo. Huntin on July 25, 2009, 11:35:00 PM
look up (fox the breed brace height).  I saw where one guy said his likes 7 3/4.  The other 2 I think had the 54 inch model and said between 6 3/4-7.5.  I don't own one, never shot one so don't blame me if they are wrong.  good luck bud.
Title: Re: Brace height for Fox Breed?
Post by: steve schrank on July 26, 2009, 04:19:00 PM
I have the same breed 58inch and 50# and i have found that mine works best at 6 3/4 inch hope this helps.
Title: Re: Brace height for Fox Breed?
Post by: rustyspike on July 26, 2009, 09:39:00 PM
My 58" I have set closer to 7.5".

Rich K
Title: Re: Brace height for Fox Breed?
Post by: Flatshooter on July 26, 2009, 10:48:00 PM
Thanks guys!
Text only | Text with Images