Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Weekend Warrior on June 02, 2009, 10:46:00 PM

Title: Easton GG 2016
Post by: Weekend Warrior on June 02, 2009, 10:46:00 PM
Which size shaft
500
400
340
28.5 50-55 spine 125gr BH  48#27 hybrid LB

I'm thinking 400???
Title: Re: Easton GG 2016
Post by: Curtis Haden on June 02, 2009, 10:52:00 PM
500 IMHO...if you can get away with it at 28.5... May have to leave it a little longer.
Title: Re: Easton GG 2016
Post by: deadpool on June 02, 2009, 11:49:00 PM
go with the 500, it would much better suit your set up
Title: Re: Easton GG 2016
Post by: maxwell on June 03, 2009, 11:29:00 AM
500 much better- or 2016's if you can get them.
Title: Re: Easton GG 2016
Post by: dirtguy on June 03, 2009, 02:07:00 PM
My 500s say "2016 components" on them.  They work great with a 125 gr BH at 28" out of my 50@28 recurve.
Title: Re: Easton GG 2016
Post by: George D. Stout on June 03, 2009, 02:10:00 PM
The 400 will be too stiff unless you weigh the ends down heavily.  The Gamegetter 500 is a 2016.  That's what I'm using on my 45# Shakespeare and Bear and they fly perfectly with 125 to 145 grain heads.
Title: Re: Easton GG 2016
Post by: JRY309 on June 03, 2009, 06:28:00 PM
500 is 2016 and uses the same componets,400 is 2117,340 is 2315 and the 300 is 2317.
Text only | Text with Images