Trad Gang

Main Boards => PowWow => Topic started by: Travisc406 on May 06, 2009, 12:41:00 AM

Title: Kustom King steel broadhead adapters.
Post by: Travisc406 on May 06, 2009, 12:41:00 AM
Does anyone have the 100 grainers and if so what did yours come out to on weight? mine are weighing in at 138 grains???
Title: Re: Kustom King steel broadhead adapters.
Post by: legends1 on May 06, 2009, 01:38:00 AM
Dont know about the 100's,But I use the 75's and the are right on the money.
Title: Re: Kustom King steel broadhead adapters.
Post by: Daddy Bear on May 06, 2009, 06:24:00 AM
Never used adapters from KK, but the 100grainers I've used and have were/are dead on. Sounds odd to be off that far.
Title: Re: Kustom King steel broadhead adapters.
Post by: Sharpster on May 06, 2009, 07:35:00 AM
Something odd there... could be some 125s or 150s got mislabeled but, 138 gr. is way off for either of those too.

I'd call Tim at KK. He's a good guy and will no doubt make things right. I suspect that he'd want to see these himself so that if there is a problem, he can get it taken care of quickly.

Ron
Title: Re: Kustom King steel broadhead adapters.
Post by: Rob DiStefano on May 06, 2009, 08:21:00 AM
mine are 100 grains as measured on my digital grain scale - how you weighing them?
Title: Re: Kustom King steel broadhead adapters.
Post by: Travisc406 on May 06, 2009, 11:36:00 AM
with my rcbs digital scale.
Title: Re: Kustom King steel broadhead adapters.
Post by: Travisc406 on May 06, 2009, 11:43:00 AM
Okay I called Kustom King Archery just now and asked them . She looked up the order and I ordered 125 grainers somehow. So now I need to check my scale. Very nice people at Kustom king archery. I knew something was goofy. Thanx again Kustom King Archery!!!!